1994 Mazda Miata - $11000
#1
Elite Member
Thread Starter
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
1994 Mazda Miata - $11000
Category: Import
Status: Clean Title
I have a 1994 Mazda Miata for sale, in USA - California.
Mileage: 120000 miles
Engine Size: 1.8
Asking price is $11000
Seller Information: Slava Yanson
Phone: (323) 963-4787
Email: urbansoot@gmail.com
1994 Widebody Miata with approximately 120k miles on chassis and engine. Clean title. A/C works great, no power steering. I'm asking $11,000 and might consider a partial trade. Well over $20,000 was invested into this project. Car is ridiculously fun at the track, to say the least.
Widebody consists of +30mm AutoKonexion blister fenders and quarter panels. Car was recently repainted glossy black. OEM hardtop has all new seals and hardware. Most of the interior was stripped, but I'm including a brand new full carpet kit if you'd like to convert it for street use. A/C is still in the car and it works. Under 2,300 lbs with rear bumper on.
Almost all parts have less than 3,000 miles, most under 1,000 miles. This is my track-only car so it doesn't get driven often.
Drivetrain:
- NB2 5 speed transmission with MiataRoadster tall angled short throw shifter
- Flyin' Miata Happy Meal clutch with 10.30 lb lightweight flywheel
- MiataRoadster clutch line
- 4.10:1 Torsen type 1 limited slip differential
- MSLabs MS3 standalone ECU with Innovate LC-2 digital (CAN) wideband
- Jackson Racing CARB certified header
- Goodwin Racing CARB certified high flow catalytic
- Yonaka 2.5" catback exhaust
- Mishimoto aluminum radiator with shroud and slim fans
Chassis/Suspension/Brakes:
- Energy Suspension polyurethane bushings
- FEAL 441 coilovers with Swift 8/6 springs
- Racing Beat adjustable front and rear sway bars
- 11" Wilwood front BBK with Carbotech XP8 pads
- M-Tuned rear BBK with Carbotech XP8 pads
- Wilwood brake proportioning valve
- ART blueprinted front hubs / Timken rear hubs and bearings / ARP extended studs
- Beatrush PPF brace
- Boss Frog frame rails
- Blackbird Fabworx custom 4 point single diagonal roll bar
- R-package/LE outer tie rods
Wheels/Tires:
- 15x9 third generation 949 Racing 6UL wheels with 225/45/15 BFG Rivals (I use these with 25mm spacers for street)
- 15x10 third generation 949 Racing 6UL wheels with 245/40/15 Hoosier R80 (1 track day on this set)
Interior:
- Cobra Suzuka FIA certified bucket seat mounted on GarageStar adjustable seat mount
- BRAND NEW MOMO Supercup FIA certified bucket seat
- RaceQuip 6 point FIA certified harness
- Momo steering wheel with NRG short hub and version 2.5 quick disconnect
- Revlimiter gauges
- Kenwood headunit with bluetooth
- DDMWorks radio surround
- Power windows conversion
Other:
- Dapper Lighting Classic V2 projector headlights with 5000K HID
Included Extras:
- Lotus Elise diffuser
- BRAND NEW parts for LS6 ignition conversion (just need to make harness)
- BRAND NEW Wilwood brake proportioning remote adjuster
- BRAND NEW Jass Performance door pulls
- Planted driver & passenger seat mounts
- BRAND NEW 5XRacing data system mounting bracket
- Power steering rack, pump, and lines
- BRAND NEW Wings West spoiler
- BRAND NEW dual feed fuel rail
- BRAND NEW Hondata intake manifold gasket
I was in process of building a new high compression VVT engine for this car, which is available separately.
Status: Clean Title
I have a 1994 Mazda Miata for sale, in USA - California.
Mileage: 120000 miles
Engine Size: 1.8
Asking price is $11000
Seller Information: Slava Yanson
Phone: (323) 963-4787
Email: urbansoot@gmail.com
1994 Widebody Miata with approximately 120k miles on chassis and engine. Clean title. A/C works great, no power steering. I'm asking $11,000 and might consider a partial trade. Well over $20,000 was invested into this project. Car is ridiculously fun at the track, to say the least.
Widebody consists of +30mm AutoKonexion blister fenders and quarter panels. Car was recently repainted glossy black. OEM hardtop has all new seals and hardware. Most of the interior was stripped, but I'm including a brand new full carpet kit if you'd like to convert it for street use. A/C is still in the car and it works. Under 2,300 lbs with rear bumper on.
Almost all parts have less than 3,000 miles, most under 1,000 miles. This is my track-only car so it doesn't get driven often.
Drivetrain:
- NB2 5 speed transmission with MiataRoadster tall angled short throw shifter
- Flyin' Miata Happy Meal clutch with 10.30 lb lightweight flywheel
- MiataRoadster clutch line
- 4.10:1 Torsen type 1 limited slip differential
- MSLabs MS3 standalone ECU with Innovate LC-2 digital (CAN) wideband
- Jackson Racing CARB certified header
- Goodwin Racing CARB certified high flow catalytic
- Yonaka 2.5" catback exhaust
- Mishimoto aluminum radiator with shroud and slim fans
Chassis/Suspension/Brakes:
- Energy Suspension polyurethane bushings
- FEAL 441 coilovers with Swift 8/6 springs
- Racing Beat adjustable front and rear sway bars
- 11" Wilwood front BBK with Carbotech XP8 pads
- M-Tuned rear BBK with Carbotech XP8 pads
- Wilwood brake proportioning valve
- ART blueprinted front hubs / Timken rear hubs and bearings / ARP extended studs
- Beatrush PPF brace
- Boss Frog frame rails
- Blackbird Fabworx custom 4 point single diagonal roll bar
- R-package/LE outer tie rods
Wheels/Tires:
- 15x9 third generation 949 Racing 6UL wheels with 225/45/15 BFG Rivals (I use these with 25mm spacers for street)
- 15x10 third generation 949 Racing 6UL wheels with 245/40/15 Hoosier R80 (1 track day on this set)
Interior:
- Cobra Suzuka FIA certified bucket seat mounted on GarageStar adjustable seat mount
- BRAND NEW MOMO Supercup FIA certified bucket seat
- RaceQuip 6 point FIA certified harness
- Momo steering wheel with NRG short hub and version 2.5 quick disconnect
- Revlimiter gauges
- Kenwood headunit with bluetooth
- DDMWorks radio surround
- Power windows conversion
Other:
- Dapper Lighting Classic V2 projector headlights with 5000K HID
Included Extras:
- Lotus Elise diffuser
- BRAND NEW parts for LS6 ignition conversion (just need to make harness)
- BRAND NEW Wilwood brake proportioning remote adjuster
- BRAND NEW Jass Performance door pulls
- Planted driver & passenger seat mounts
- BRAND NEW 5XRacing data system mounting bracket
- Power steering rack, pump, and lines
- BRAND NEW Wings West spoiler
- BRAND NEW dual feed fuel rail
- BRAND NEW Hondata intake manifold gasket
I was in process of building a new high compression VVT engine for this car, which is available separately.
#9
What are you looking to sell? I'm in Temecula. Interested in the momo seat, steering wheel/quick release, 15x9's, frame rail, roll bar, radiator, maybe suspension. Essentially getting ready to start turning my 2000 se into a better weekend warrior/track car over winter. I could supply stock parts if you needed them to keep the car moving. Let me know. Thanks,
Evan
Evan
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM