1991 Pit Crew Mazda Miata 1.8 swap JDM RARE
05-18-2016, 08:08 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Location: Austin
Posts: 217
Total Cats: -1
1991 Pit Crew Mazda Miata 1.8 swap JDM RARE
1991 Pit Crew Mazda Miata 1.8 swap JDM RARE
Located in Ann Arbor, MI
118k mi
Exterior:
Pitcrew front end with chrome bumpers
Hella H4
S800 mirrors
Zoom Side winker turn signals
Beatrush fuel lid
Autokonexion Ducktail 1.5
Euro rear finish panel
Zoom tail lights
Panasport 15x7 0 offset with Hankook Ventus v12 205
OEM Hardtop with headliner and defroster. NO convertible top
Jass hardtop brackets
Interior:
Momo Prototipo
NRG quick release
Stainless door sills
Redline Leather wrapped cluster hood
Revlimiter gauges
KG Works black retro cluster
Aerodramatics needles
Redline Leather wrapped tombstone
Aerodramatics metal door pulls and door locks
Nielex silver door cups
RS Products HVAC with spun silver *****
KG Works rear view mirror
Revlimiter Retro hazard switch
Revlimiter Retro window switch
Revlimiter Chrome Vent Rings
Garagestar polished brake handle (new)
Garagestar delrin door bushings (new)
Miataroadster tall angled short shift kit (new, just rebuilt shifter, new shift boots, delrin bushings)
Hard Dog Double Diag with harness bar, fitted padding and fitted cover
93LE interior door panels with retro 93LE speaker covers
Engine:
ARP hardware for crank pulley
Gates racing accessory belt (new)
Trackspeed Dual Core Race Radiator (new! this alone is $600, also performed a Zerex Asian Coolant flush)
FM lower silicone hose (new)
Tubular header
Flowmaster DBX exhaust
Stainless clutch cable
Exedy MC and Slave cylinder
Flyin Miata Happy meal clutch
FC3S clutch type LSD in 1.8 housing with 4.10 gear
New driveshaft bolts
Just changed engine and trans oil
Suspension:
Manual rack
KYB AGX
Racing beat lower control arm brace (not installed)
Suspension techniques sway bars
1.8 brakes (i believe) with stainless brake lines
This has an extremely rare Pit Crew Racing front end imported from Japan. This front end is over $3000 (chrome bumpers are extra!) PLUS shipping from japan alone, unpainted and uninstalled. There are only a handful of miata's in the USA (4 including this one, to my knowledge) with this front end conversion! If you are familiar with the miata scene, the nose came from the "Blue Potato" and this was previously Phillyb's "Pitcrewb". Prior to that it was a worker from the Miata parts distributor, Planet Miata. Planet Miata performed the 1.8L swap with a 120k engine, the body has ~118k on it. He also performed a wire tuck for a clean engine bay look. I have fixed several things on it and made the interior a bit more presentable. Unfortunately I am moving to Texas and need a car with AC! If you are familiar with Miata's, you'll see that there are many rare parts and many parts that are no longer available. A little more love and this will be one unique, retro miata
The not so good:
The paint job is a 15 footer - the hardtop has typical chips around the edge. Needs a good clean.
The nose has some chips on the bottom as it used to have a TRAP lip mounted to it, but the previous owner broke it off.
The rear tires rub over some bumps
Oil pressure gauge does not function.
No console, unless you buy the Zoom console from me or a bare Zoom fiberglass console.
Voodoo spherical **** included - TWM hybrid or Joyfast type **** would be extra.
Dash crashpad will be black unless you purchase the 93LE dash with car.
Rear racing beat subframe brace rough and cut for exhaust.
$8000
Price may increase as I fix more things or add more things.
Additional things I have for sale that are NOT included with the car:
I have a 93LE complete dash available 93LE carpet, plastics, and seat belts if you would like to complete the 93LE red interior conversion. and many other miata parts for a turbo build.
-Zoom Console Type 1 console - black anodized / black leather armrest $600
-Zoom Type 2 Black leather Radio cover (3 gauge, both silver and black faces) $475
-Hard dog Double Diag HC Chrome roll bar $950
-93LE plastics/carpet/dash/seatbelts $700 with car purchase.
-Zoom Fuel Lid $220
-Beatrush Aluminum radiator Panel $120
-Koni Race, Koni Sleeves, Swift springs 750/450, Repainted in Koni classic red with FCM shock mounts, 36mm bumpstops $1000
-NA front and rear subframes - sandblasted and powdercoated black - not used since! $250 (powdercoating was more than this!)
-Full painted OEM control arm set installed ES poly bushings, never used. upper ball joints need replacing $575
-Boundary Street Billet Oil pump $270
-Rare rearview mirror with built in Map lights PNP! $150
-Miata Link ECU with 1.6 ECU, Link screen and USB adapter $200
-Flyin Miata Flex Fuel Kit with FM 1.6 purple rail $850
-ID1000 injectiors with miata pigtails $400.
-MS3PRO with DIYBOB harness to make it PNP (made by Braineack) for 90-93 $1100
-Odyssey PC680MJ with billet battery bracket $175
-New ARtech 3" full v-band 3" cat back exhaust with Magnaflow 12579 (Turbo, manifold, and DP have been sold) $700
-New Boundary engineering street pump $270
Located in Ann Arbor, MI
118k mi
Exterior:
Pitcrew front end with chrome bumpers
Hella H4
S800 mirrors
Zoom Side winker turn signals
Beatrush fuel lid
Autokonexion Ducktail 1.5
Euro rear finish panel
Zoom tail lights
Panasport 15x7 0 offset with Hankook Ventus v12 205
OEM Hardtop with headliner and defroster. NO convertible top
Jass hardtop brackets
Interior:
Momo Prototipo
NRG quick release
Stainless door sills
Redline Leather wrapped cluster hood
Revlimiter gauges
KG Works black retro cluster
Aerodramatics needles
Redline Leather wrapped tombstone
Aerodramatics metal door pulls and door locks
Nielex silver door cups
RS Products HVAC with spun silver *****
KG Works rear view mirror
Revlimiter Retro hazard switch
Revlimiter Retro window switch
Revlimiter Chrome Vent Rings
Garagestar polished brake handle (new)
Garagestar delrin door bushings (new)
Miataroadster tall angled short shift kit (new, just rebuilt shifter, new shift boots, delrin bushings)
Hard Dog Double Diag with harness bar, fitted padding and fitted cover
93LE interior door panels with retro 93LE speaker covers
Engine:
ARP hardware for crank pulley
Gates racing accessory belt (new)
Trackspeed Dual Core Race Radiator (new! this alone is $600, also performed a Zerex Asian Coolant flush)
FM lower silicone hose (new)
Tubular header
Flowmaster DBX exhaust
Stainless clutch cable
Exedy MC and Slave cylinder
Flyin Miata Happy meal clutch
FC3S clutch type LSD in 1.8 housing with 4.10 gear
New driveshaft bolts
Just changed engine and trans oil
Suspension:
Manual rack
KYB AGX
Racing beat lower control arm brace (not installed)
Suspension techniques sway bars
1.8 brakes (i believe) with stainless brake lines
This has an extremely rare Pit Crew Racing front end imported from Japan. This front end is over $3000 (chrome bumpers are extra!) PLUS shipping from japan alone, unpainted and uninstalled. There are only a handful of miata's in the USA (4 including this one, to my knowledge) with this front end conversion! If you are familiar with the miata scene, the nose came from the "Blue Potato" and this was previously Phillyb's "Pitcrewb". Prior to that it was a worker from the Miata parts distributor, Planet Miata. Planet Miata performed the 1.8L swap with a 120k engine, the body has ~118k on it. He also performed a wire tuck for a clean engine bay look. I have fixed several things on it and made the interior a bit more presentable. Unfortunately I am moving to Texas and need a car with AC! If you are familiar with Miata's, you'll see that there are many rare parts and many parts that are no longer available. A little more love and this will be one unique, retro miata
The not so good:
The paint job is a 15 footer - the hardtop has typical chips around the edge. Needs a good clean.
The nose has some chips on the bottom as it used to have a TRAP lip mounted to it, but the previous owner broke it off.
The rear tires rub over some bumps
Oil pressure gauge does not function.
No console, unless you buy the Zoom console from me or a bare Zoom fiberglass console.
Voodoo spherical **** included - TWM hybrid or Joyfast type **** would be extra.
Dash crashpad will be black unless you purchase the 93LE dash with car.
Rear racing beat subframe brace rough and cut for exhaust.
$8000
Price may increase as I fix more things or add more things.
Additional things I have for sale that are NOT included with the car:
I have a 93LE complete dash available 93LE carpet, plastics, and seat belts if you would like to complete the 93LE red interior conversion. and many other miata parts for a turbo build.
-Zoom Console Type 1 console - black anodized / black leather armrest $600
-Zoom Type 2 Black leather Radio cover (3 gauge, both silver and black faces) $475
-Hard dog Double Diag HC Chrome roll bar $950
-93LE plastics/carpet/dash/seatbelts $700 with car purchase.
-Zoom Fuel Lid $220
-Beatrush Aluminum radiator Panel $120
-Koni Race, Koni Sleeves, Swift springs 750/450, Repainted in Koni classic red with FCM shock mounts, 36mm bumpstops $1000
-NA front and rear subframes - sandblasted and powdercoated black - not used since! $250 (powdercoating was more than this!)
-Full painted OEM control arm set installed ES poly bushings, never used. upper ball joints need replacing $575
-Boundary Street Billet Oil pump $270
-Rare rearview mirror with built in Map lights PNP! $150
-Miata Link ECU with 1.6 ECU, Link screen and USB adapter $200
-Flyin Miata Flex Fuel Kit with FM 1.6 purple rail $850
-ID1000 injectiors with miata pigtails $400.
-MS3PRO with DIYBOB harness to make it PNP (made by Braineack) for 90-93 $1100
-Odyssey PC680MJ with billet battery bracket $175
-New ARtech 3" full v-band 3" cat back exhaust with Magnaflow 12579 (Turbo, manifold, and DP have been sold) $700
-New Boundary engineering street pump $270
Reply
0
0
