mr.na

Im preparing for my installation of my greddy turbo kit (td04h-15g) that should arrive anytime soon.

First, does the turbo needs a restrictor on the oil feed line? my guess is .060''

Second, I'm also looking for a correct banjo fitting for the feed on the turbo. Is it M10 x 1.25 to -4AN that I should get???

http://www.ebay.com/itm/M10x1-25-Tur...item3a6efcd675

Is that a good part to use considering I will not use the three way splitter at the hose beginning??

-I have actually -4AN oil line that connects to the oil port next to the dipstick with a M10 x1.5 to -4AN fitting.

thanks for the upcoming answers, soooo looking forward to boost.

hornetball

iTrader: (4)

No oil restrictor required (journal bearing turbo).

Kit comes with adequate oil feed line. Do you not have the line from the kit?

mr.na

NO, no lines were included in the kit, I bought a clean low millage used greddy kit customized to get better results out of it. tony turbo downpipe, fmic...

I just want to confirm the information:
-Is the oil feed fitting on the TD04H-15G turbo is M10x1.25, yes or no...

devin mac

iTrader: (2)

correct: from my greddy based build:

https://www.miataturbo.net/showthrea...highlight=feed