MS, EGR and emmisions
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Seattle Area
Posts: 74
Total Cats: 0
MS, EGR and emmisions
I have a 95 (OBD I with EGR) and emissions are done with a sniffer.
I just ordered a MS, I'm planning to go standalone. What should I do with the EGR? The MS threads don't mention EGR and it seem like the ECU would have to control the valve so I take it people just disable the EGR?
The EGR pipe is in the way of the coolant reroute so I like the idea of getting rid of it. I'm buying a used FM manifold/turbo/downpipe setup from a 99, the manifold fits the head but the EGR bung is in the wrong location.If I get rid of the EGR, that shouldn't be an issue.
Has anyone had issues passing emissions with an OBD I 1.8 with standalone MS without EGR?
I just ordered a MS, I'm planning to go standalone. What should I do with the EGR? The MS threads don't mention EGR and it seem like the ECU would have to control the valve so I take it people just disable the EGR?
The EGR pipe is in the way of the coolant reroute so I like the idea of getting rid of it. I'm buying a used FM manifold/turbo/downpipe setup from a 99, the manifold fits the head but the EGR bung is in the wrong location.If I get rid of the EGR, that shouldn't be an issue.
Has anyone had issues passing emissions with an OBD I 1.8 with standalone MS without EGR?
#3
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,057
Total Cats: 6,618
Actually, canister purge would be extremely easy to implement. Just a simple relay driver set to active whenever TPS (or MAP) > a midrangeish threshold.
EGR would be a little harder. I know that it's a PWM control scheme, however it has four coils and I've never seen any sort of documentation on how they are configured and driven. Possible? Probably. I just don't think that anyone has ever put much effort into it, since it's not really a power adder.
It should be entirely possible to tune the engine to pass without it. There are still vehicles being made today which don't have EGR. The EJ255-equipped Subarus, for instance, don't have it. They do have three cats and a very low CR, but still...
#4
Sorry for my ignorance - does that mean that the purge solenoid could just be continuously open at part throttle (assuming the solenoid is normally open to atmosphere)? Does it need any sort of a timer-based cycling scheme?
I do notice that there is an EGR position sensor, so I figure there's some sort of feedback loop going along with a PWM drive. I guess if I want to know more I should go figure it out, but as you point out, the reward isn't there. Maybe I can pass CA emissions anyway - I didn't realize that there were production cars without EGR.
I do notice that there is an EGR position sensor, so I figure there's some sort of feedback loop going along with a PWM drive. I guess if I want to know more I should go figure it out, but as you point out, the reward isn't there. Maybe I can pass CA emissions anyway - I didn't realize that there were production cars without EGR.
Typically, EGR is simply discarded when installing any standalone ECU, along with the canister purge valve and so on.
Actually, canister purge would be extremely easy to implement. Just a simple relay driver set to active whenever TPS (or MAP) > a midrangeish threshold.
EGR would be a little harder. I know that it's a PWM control scheme, however it has four coils and I've never seen any sort of documentation on how they are configured and driven. Possible? Probably. I just don't think that anyone has ever put much effort into it, since it's not really a power adder.
It should be entirely possible to tune the engine to pass without it. There are still vehicles being made today which don't have EGR. The EJ255-equipped Subarus, for instance, don't have it. They do have three cats and a very low CR, but still...
Actually, canister purge would be extremely easy to implement. Just a simple relay driver set to active whenever TPS (or MAP) > a midrangeish threshold.
EGR would be a little harder. I know that it's a PWM control scheme, however it has four coils and I've never seen any sort of documentation on how they are configured and driven. Possible? Probably. I just don't think that anyone has ever put much effort into it, since it's not really a power adder.
It should be entirely possible to tune the engine to pass without it. There are still vehicles being made today which don't have EGR. The EJ255-equipped Subarus, for instance, don't have it. They do have three cats and a very low CR, but still...
Thread
Thread Starter
Forum
Replies
Last Post