nolig2278

Hi
2 of my 4 injectors had the insulators around the pin cracked. Where can I buy new seal kits that include the insulator and not just the o-rings? I plan to change all 4 as it seems easy enough. I have early 90s blacktop injecotrs from Japanese BPT.
Thanks

slammed200

iTrader: (8)

Napa, AutoZone or Advance Auto Parts usually carry them

shuiend

iTrader: (24)

Miatamecca on eBay has sets of all the injectors seals you needs for all 4 injectors for $13 shipped. Much cheaper then any local parts stores who want between $7-$10 an injector.

bahurd

iTrader: (8)

@300zxrb26dett also had them available on this site. I bought a bunch from him and he's a good reliable seller (assuming he's still doing it).

Just PM him and let him know which injectors you have.

https://www.miataturbo.net/miata-par...ld-kits-78558/

nolig2278

Advanced auto and autozone seem to sell a pintle cover that is shorter than the original and rubbery looking. Are those ok to used as opposed to the longer neck factory ones? if not i will get from 300zxrb26dett but that will delay my completion by a week.
Thanks

bahurd

iTrader: (8)

Why don't you just pay him for priority mail and you'll get exactly what you need. You really should use the ones made for the injectors. Gas leaks really do suck especially when it turns to flame.

nolig2278

I have not heard back from 300zxrb26dett and the stuff on Autozone and Advance is not a match for my current pintles, anyone know where else I can get the pintle caps?

Thanks

nolig2278

i guess i will go with injector-rehab.com

aidandj

iTrader: (5)

Denso Bottom Cushions (4x) ? Flow Force Injectors

Is this what you need?

nolig2278

I need this Mazda Toyota Nippondenso Pintle Cap so I ordered the whole kit Mazda Miata Kit and a spare set.