Stock rod specs
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Dothan, AL
Posts: 130
Total Cats: 0
Stock rod specs
I have searched on here and on the internet and havent found my answer. I have seen specs for the 1.6 and 1.8 rods are the same.
should be 133mm long with a 20mm pin hole and a big end bore of right around 48mm.
What I havent found is the big end thickness and the piston end thickness. Does anyone know this or can measure a rod they have availible with a digital caliper for me. Possibly a rod spec sheet from eagle or carrillo.
Thanks
should be 133mm long with a 20mm pin hole and a big end bore of right around 48mm.
What I havent found is the big end thickness and the piston end thickness. Does anyone know this or can measure a rod they have availible with a digital caliper for me. Possibly a rod spec sheet from eagle or carrillo.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM