need a 2 bolt exhaust gasket that matches the oem bolt pattern. i can't find **** and the donuts gaskets don't work. pipe size is 2.25-2.5 (header is 2.25 and mid is 2.5). just really need it to match the bolt alignment and seal between the flanges.

anyone have a part number or lead on a car with a matching gasket?

 

Measure the distance between the center of the 2 bolt holes and report back.

 

about 4 - 11/32"

 

red gasket maker?

 

**** i just threw my wrapper away...lemme look

Felpro PN 60620...is that the one?

Im not sure if the NB is different, but it might be this one Felpro PN 60831

 

go to advanced and tell em what you need and what size they have it they just have to dig for it in the back.

 

swear i've seen those at every auto parts store.

 

i took my header to oreilly and auto zone every time it was off the car and could never find anything.

 

this **** works WELL.

Dont ask me how, but it held up on a presious setup on the turbo manifold to turbo connection... even under track days.

 

http://vibrantperformance.com/catalo...1022_1068_1126

 

From Napa's you should be able to get the following :

Part: EXH 31532
Center Hole Size : 2 3/8"
Mounting Bolt to Bolt Dimension : 4 5/16"

 

my exhaust is begger then 2 3/8"

 

Your initial post said 2.25-2.5 so I figured that would work, whats inner diameter of exhaust?