1990 Miata Engine and Chassis Harness Separation Help.
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2011
Location: Tyler, TX
Posts: 253
Total Cats: 1
1990 Miata Engine and Chassis Harness Separation Help.
So guys, I need help separating the two and removing the engine harness. I have the factory wiring harness, but it seems as if a lot of things are tied together. Hell, I only need the lights to work. Everything else can GTFO. Can anyone give me some links to help me or offer any advice? I'm starting to get stumped. And if you are wondering why I am doing this, there is another power plant going in it.
#2
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2011
Location: Tyler, TX
Posts: 253
Total Cats: 1
I found this diagram and the only thing questionable was the brake light, and that raises throttle, so it can be ditched. I guess what I am asking is can I simply trace all of these wires and get rid of them?
#6
I recently did this on my 91. Mainly to scratch build a MS3X harness and get rid of the mound of wiring that isn't needed. I ended up using my own fuse box and tucking and Mil-spec'ing the entire harness in the process. Basically I just studied the wiring diagram and cut out what wasn't need then cut/extended/spliced as needed. I will tell you now it is easier to just cut all the grounds out in the beginning and rerun them when you are done. They are so intertwined in the harness it is impossible to sort it all out.
#7
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,072
Total Cats: 6,625
Probably not, given that jobs of this nature tend to each be unique.
The best tool is simply a copy of the wiring diagrams from the factory service manual, and some patience. Here is the manual:
http://boostedmiata.com/servicemanua...vicemanual.pdf
Right-click, Save As.
As you will find, there is very little segregation of the various harnesses by function. The several harnesses join one another at the "Common Connectors", which are the ones denoted by an X, and are described in pages 1178-1180.
The best tool is simply a copy of the wiring diagrams from the factory service manual, and some patience. Here is the manual:
http://boostedmiata.com/servicemanua...vicemanual.pdf
Right-click, Save As.
As you will find, there is very little segregation of the various harnesses by function. The several harnesses join one another at the "Common Connectors", which are the ones denoted by an X, and are described in pages 1178-1180.
Thread
Thread Starter
Forum
Replies
Last Post
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM