Fireindc

iTrader: (13)

Hmm, looking on ebay and i came across http://cgi.ebay.com/ebaymotors/Mazda...em200076079083

What kind of modifications am i looking at to make this fit on my car?

Thanks.

cjernigan

iTrader: (13)

The hangers are different.

brgracer

iTrader: (14)

Flange that mates up with the cat will also be off 30 degrees or so. So in addition to changing the hangers, you'd have to cut and re-weld the flange.

kotomile

iTrader: (24)

How big is the piping?

If all it is is a flange that needs rotation and some new and/or modded hangers, just take it and the car to any muffler shop.

Fireindc

iTrader: (13)

Hmm, yeah anyone know the diameter on it?

Looks like ill try and pick one up then.

atli126

2.375 is the piping size

Fireindc

iTrader: (13)

Oh, thanks. 5 years later and i get the answer, you're a lifesaver!

curly

iTrader: (25)

Wowsa. That's a hell of a thread bump.

atli126

Haha

mr_hyde

iTrader: (4)

No, not really funny. I just spent 45 seconds of my life reading this thread before I noticed the 2007 date. I won't get that 45 seconds back. I have also spent over twice that to craft this response and another 3 seconds giving you negative props. We're up to almost 3 minutes.

atli126

Lol let's keep this going. I'm going to be putting an oem msm on my n/a 94 na miata, I am under the impression that I can just add a few hangers and it will fit and bolt up to my cat. I am only getting the 2 rear sections not the dp

richyvrlimited

iTrader: (1)

it's much more than the hangers. CAT won't line up/bolt up, exhaust route won't work.

olderguy

iTrader: (19)

Come back in 2017 and I will clarify

atli126

Actually we did have to make a hanger spot under the trunk, and make additions to the stock msm hangers and cut and re angle the 2 bolt flange for it to work. But definitely not that bad. Also the msm exhaust made more power and tq from my butt dyno than my old 2.5 magnaflow /resonator made.... Plus no drone on the highway and decent stockish sound. Plus when I go turbo it will be the perfect sound just like oem quiet :-)

fwMiata

And super restrictive....

atli126

I am okay with that too. It'll be a nice boosted dd. When I wanna go hammer ill take the rx7 out and open the cutouts lol

Leafy

iTrader: (1)

You need an NB header and DP for a NB catback to fit. Basically you need an entire NB exhaust to use any part of an NB exhaust.

curly

iTrader: (25)

Been waiting almost 3 months dude...

olderguy

iTrader: (19)

What was the question, again?

Fireindc

iTrader: (13)

LOL.