Improved Spark out, bias resistor value 01-05 clt
#1
Improved Spark out, bias resistor value 01-05 clt
im in the middle of building my spark out and i noticed that the r24 and r28 resistors are not the same. one is listed as a 1/4 watt and the other is 1/2. im not a electronics wiz but i noticed the schematic is not symmetrical. should i stuff a 1/2 watt resistor in there and stop asking stupid questions or did i like...stumble upon a typo.
also ive read how to get the bias resistor value of the stock sensor and ive read on how to get a few temp/voltage values to plug into tunerstudio but thats alot of work that im capable of doing but it would be awesome if someone could just tell me what they are. i feel like someone on here has to know.
thanks turbo people
sam
also ive read how to get the bias resistor value of the stock sensor and ive read on how to get a few temp/voltage values to plug into tunerstudio but thats alot of work that im capable of doing but it would be awesome if someone could just tell me what they are. i feel like someone on here has to know.
thanks turbo people
sam
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM