HighRes Rev Limit Problem (tried writing .msq by hand)
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
HighRes Rev Limit Problem (tried writing .msq by hand)
Just flashed high res 10e
I am having that rev limit problem at 2500 that many people are running into. I have re-entered all the values by hand after reflashing the firmware, and still no luck. Do you have any idea? I have been searching but have come up with nothing
Thanks
I am having that rev limit problem at 2500 that many people are running into. I have re-entered all the values by hand after reflashing the firmware, and still no luck. Do you have any idea? I have been searching but have come up with nothing
Thanks
#5
Pm me your email, i'll send you a msq that you can add your own fuel/spark settings to. Worth a try anyway. Just remember, nothing about my MSQ is really safe for you car but atleast I know my MSQ doesn't have a rev limit issue. Edit/use it at your own risk. As in, set the overboost for your own settings, load fuel/spark maps, cranking pws, AE, all that good stuff.
#9
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
i cant run megatune. Each time I install and uninstall I get
ERROR:megatune.ini:0006.
Its a settings error. Its odd because I am doing a clean install using DIY's PNP.exe file.
so tempted to just reinstall windows, lol..that is the only thing that computer is being used for
ERROR:megatune.ini:0006.
Its a settings error. Its odd because I am doing a clean install using DIY's PNP.exe file.
so tempted to just reinstall windows, lol..that is the only thing that computer is being used for
#11
Re-install the DIYAutoTune stuff then follow this procedure:
http://ozmx5.com/viewtopic.php?f=4&t=13
If you are still getting the limit, I have a file from Jerry that cured the problem for me, but hopefully you won't need it.
http://ozmx5.com/viewtopic.php?f=4&t=13
If you are still getting the limit, I have a file from Jerry that cured the problem for me, but hopefully you won't need it.
#12
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
After using Cjernigan's msq (and changing to my constants, etc) I am still hitting the limit. Same thing happened with DIY's 96/97 Msq.
Saboteur, could you send your map my way so I can give it a try?
Do you need a variable TPS to run HighRes? Isnt it just to increase resolution on Pulse widths, etc?
Saboteur, could you send your map my way so I can give it a try?
Do you need a variable TPS to run HighRes? Isnt it just to increase resolution on Pulse widths, etc?
#13
I have a feeling just trying all these msq's isn't going to resolve your issue. Download a new firmware file, re-easytherm it, then reflash the firmware. If you had some kind of msq corruption it is very possible it corrupted your firmware. If 3 different msq's did the same thing then you're pissing in the wind trying more.
Reflash your firmware and report back. You can get the latest hi-res firmware(10F) here:
http://msextra.com/viewtopic.php?t=25336
Reflash your firmware and report back. You can get the latest hi-res firmware(10F) here:
http://msextra.com/viewtopic.php?t=25336
#14
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
I reflashed the firmware and the same thing happened. Maybe I am doing something wrong but I dont see what it could be.
I install megatune and then replace the ini files and .s19 files and then flash the firmware. I then copied the air,therm, and mat files from easytherm to the src folder of megatune.
Opened up megatune and it was showing HighRes on the top so that was good. I burned the msq (with zero errors) and still its the same thing.
If i hold down the accelerator I can rev past the mark, and once it breaks that point its fine. I checked spark tables and fuel tables, even rev limit settings.
I reflashed to non high res and it worked fine.
I install megatune and then replace the ini files and .s19 files and then flash the firmware. I then copied the air,therm, and mat files from easytherm to the src folder of megatune.
Opened up megatune and it was showing HighRes on the top so that was good. I burned the msq (with zero errors) and still its the same thing.
If i hold down the accelerator I can rev past the mark, and once it breaks that point its fine. I checked spark tables and fuel tables, even rev limit settings.
I reflashed to non high res and it worked fine.
#15
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
I have tried everything, down to reinstall windows and then all Megatune stuff.
I have uploaded my MSQ and a log to see what was happening during this "rev limit". Please anyone take a look and offer suggestions.
Thanks
http://www.mediafire.com/?dx1wzikjx1x
http://www.mediafire.com/?jytm9a1y9nz
I have uploaded my MSQ and a log to see what was happening during this "rev limit". Please anyone take a look and offer suggestions.
Thanks
http://www.mediafire.com/?dx1wzikjx1x
http://www.mediafire.com/?jytm9a1y9nz
#19
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
haha, all good. I have been reading over msextra dev. forums and still nothing. Seems everyone has this problem but it is solved with hand entry of the code.
if anyone wants to check out my logs, they are above
if anyone wants to check out my logs, they are above
#20
Junior Member
Thread Starter
Join Date: Dec 2007
Location: San Diego to LA, CA
Posts: 297
Total Cats: 0
Any help would be appreciated. I have spend hours on this to no avail. I read through the MSExtra Dev. pages and nothing.
I really dont know what to do. Is there any hardware that needs to be different between high res and non? I am beginning to think its a hardware issue or something since I cannot get it to work no matter what I try. (reinstalling megatune, reflashing etc.)
I really dont know what to do. Is there any hardware that needs to be different between high res and non? I am beginning to think its a hardware issue or something since I cannot get it to work no matter what I try. (reinstalling megatune, reflashing etc.)