BP4A head supertech springs/valves, carrillo rods, crank, valve cover, more...
10-11-2014, 05:30 PM
#1
BP4A head supertech springs/valves, carrillo rods, crank, valve cover, more...
-BP4A head with supertech valves/springs:
Selling my complete cylinder head from a 99 engine. Has about 500 miles on it since it was rebuilt with the valvetrain.
The good: Has supertech single spring upgrade with titanium retainers and supertech oversize/backcut intake and exhaust valves. New sealed power guides were installed with the valves. Also has trackspeed coolant next delete kit. Intake ports were port matched at the opening to the phenolic gasket that will be included. I will also include a bunch of valve adjustment discs so you can spec it to your cams.
The not so good: The cam journals have some scuffing from debris in the oil. I think they are usable/can be polished by a machine shop. The engine ran great, and it had great oil pressure all the way up to it being disassembled.
That being said, there are over $700 in aftermarket parts included, let alone the $550 I spent on machine work. Being that it needs some work, I am asking $650 shipped OBO.
-Carrillo rods
These have 500 miles on them. No known problems. Much lighter than stock or others that are out there (mixed with alum flywheel and supermiata damper, the engine revved like a sportbike). Retail for $800. Asking $700 shipped OBO.
-Bosch water pump
Water pump has 500 miles on it. Bosch part number is 97176. Fits 94-05 1.8 cars. Asking $45 shipped OBO.
-99 valve cover
From 99 engine. No problems. Not cut. Includes cam position sensor. Asking $90 shipped OBO.
-96 crank sensor
Removed from 96 Miata with 155,000 miles. No known problems. Worked fine when removed. Asking $40 shipped OBO.
-99 Crank
Has around 45,000 miles on it. Journals have very light scratches (barely catch a nail). Asking $150 shipped OBO.
-96 Flywheel
Removed from 96 Miata with 150,000 miles. Fits all 1.8 models. No known problems. Asking $35 shipped OBO.
-99 Dampener/Pulley
Works fine, no known problems. Removed from a 85,000 mile engine. Asking $100 shipped OBO.
-96 Fuel injector harness
Stock harness, no known problems. Asking $25 shipped OBO
-96 Starter
Works fine, no known problems. Asking $30 shipped OBO
PM me with questions/offers
Thanks,
Jason
Selling my complete cylinder head from a 99 engine. Has about 500 miles on it since it was rebuilt with the valvetrain.
The good: Has supertech single spring upgrade with titanium retainers and supertech oversize/backcut intake and exhaust valves. New sealed power guides were installed with the valves. Also has trackspeed coolant next delete kit. Intake ports were port matched at the opening to the phenolic gasket that will be included. I will also include a bunch of valve adjustment discs so you can spec it to your cams.
The not so good: The cam journals have some scuffing from debris in the oil. I think they are usable/can be polished by a machine shop. The engine ran great, and it had great oil pressure all the way up to it being disassembled.
That being said, there are over $700 in aftermarket parts included, let alone the $550 I spent on machine work. Being that it needs some work, I am asking $650 shipped OBO.
-Carrillo rods
These have 500 miles on them. No known problems. Much lighter than stock or others that are out there (mixed with alum flywheel and supermiata damper, the engine revved like a sportbike). Retail for $800. Asking $700 shipped OBO.
-Bosch water pump
Water pump has 500 miles on it. Bosch part number is 97176. Fits 94-05 1.8 cars. Asking $45 shipped OBO.
-99 valve cover
From 99 engine. No problems. Not cut. Includes cam position sensor. Asking $90 shipped OBO.
-96 crank sensor
Removed from 96 Miata with 155,000 miles. No known problems. Worked fine when removed. Asking $40 shipped OBO.
-99 Crank
Has around 45,000 miles on it. Journals have very light scratches (barely catch a nail). Asking $150 shipped OBO.
-96 Flywheel
Removed from 96 Miata with 150,000 miles. Fits all 1.8 models. No known problems. Asking $35 shipped OBO.
-99 Dampener/Pulley
Works fine, no known problems. Removed from a 85,000 mile engine. Asking $100 shipped OBO.
-96 Fuel injector harness
Stock harness, no known problems. Asking $25 shipped OBO
-96 Starter
Works fine, no known problems. Asking $30 shipped OBO
PM me with questions/offers
Thanks,
Jason
0
10-19-2014, 11:49 AM
#5
Senior Member
Join Date: Feb 2009
Location: Philadelphia
Posts: 916
Total Cats: 70
My head journals had the same exact marks in them. I didn't want to polish anything because you can't put bearings or anything in there to bridge the gap. These heads tick anyway, is what it is.
GL with sale, nice prices!
GL with sale, nice prices!
0
10-24-2014, 01:25 AM
#9
Newb
Join Date: Oct 2010
Location: West Palm Beach, FL
Posts: 31
Total Cats: 0
Still have that water pump?
0
11-06-2014, 07:33 PM
#14
Newb
Join Date: Nov 2014
Posts: 1
Total Cats: 0
Do you still have connecting rods?
Jeff
Jeff
0
11-08-2014, 08:11 AM
#16
Update: Rods, water pump, flywheel, pulley, and starter are still available. I have many more parts that I need to get together and get listed. Maybe this weekend, maybe next (ac compressor, oil pan, brackets, dipstick, hydraulic clutch parts, block plate, and more).
Jason
Jason
0
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
