1.6 JRSC, Megasquirt PNP, T25, CF bucket seat, and some other shetty stuff!!!
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: SoCal
Posts: 68
Total Cats: 0
1.6 JRSC, Megasquirt PNP, T25, CF bucket seat, and some other shetty stuff!!!
I need monies! I'm in debt of a loan, so I need the monies quick!
FOR SALE:
$300 - Sport Brakes
- comes with calipers, brackets, and worn out brake pads
- complete, for the front AND rear! =)
$850 - used M45 JRSC kit (1.6 nonAC/nonPS)
- comes with 1.6L AFM, smaller SC nose pulley (for more boost!), but no engine management
- also comes with JR high flow fuel pump
- it's a complete kit.. all brackets, tensioners, pulleys, belts, etc.. included
- i know i know.. who in their right mind would buy a SC in the first place =(
only pictures of the blower itself. too lazy to take pictures of all the brackets, hoses, etc.. hahaha. but if you REALLY want to see pics of them then i will take them.
$550 - MEGASQUIRT! (MSPNP9093)
- includes vacuum hose and computer cable!
- It's used
$215 - Tom's motorsports CF bucket seat
- no brackets/sliders
- BRAND SPANKIN NEW!
- got it from someone on this board but never installed due to lack of fab skills =(
-its very pretty
$40 - RX7 AFM
- Who in their right mind would UPGRADE their shitty AFM to a better-but-still-shitty AFM when they can get do an AFM-delete? Scroll up to buy MSPNP
$100 (pending to jamessomething)- Stock daisy wheels w/center caps
- PLENTY OF TREAD!
$15 - Stock NA intake
- includes snorkel and airbox, but not the crossover tube
- someone just buy it to help a brotha out?
$15 - Spare wheel
- buy it to help a brotha out?
- comes with the cover AND the bolt, so you can tie it down right!
$100 - Used SR20 T25 turbo
- I got it from someone on this board, but it wasn't in the condition as advertised
- Blades are in EXCELLENT shape
- No play side-to-side or in/out, but it doesnt spin good. I'm pretty sure it's because the nut is tightened a little too much.
- Don't take my word for it because I'm not a turbo master!!
$10 (or free...) - NA Sun Visors
- I accept donations?
- Just take these away from me, but leave me some sort of compensation!
All items located in Inland Empire, CA. (City of Perris to be exact). Convenient pickup for those of you who go to Inland Drift.
I can ship any of it (except the wheels), but you cover the shipping costs.
Prices are without shipping. I prefer local pickup anyhow so you can check them out for yourself in person and determine whether you REALLY want them or not.
ALL PRICES ARE OBO! But don't be surprised if I say no, hahaha. I'm a pretty reasonable guy, but some people lowball like whoa.
Keep in mind that:
You are taking advantage of a poor college student who happens to be in a bad situation!!! I would be keeping some of this stuff (I<3MSPNP,T25,seat) but I have no choice.. sadly..
FOR SALE:
$300 - Sport Brakes
- comes with calipers, brackets, and worn out brake pads
- complete, for the front AND rear! =)
$850 - used M45 JRSC kit (1.6 nonAC/nonPS)
- comes with 1.6L AFM, smaller SC nose pulley (for more boost!), but no engine management
- also comes with JR high flow fuel pump
- it's a complete kit.. all brackets, tensioners, pulleys, belts, etc.. included
- i know i know.. who in their right mind would buy a SC in the first place =(
only pictures of the blower itself. too lazy to take pictures of all the brackets, hoses, etc.. hahaha. but if you REALLY want to see pics of them then i will take them.
$550 - MEGASQUIRT! (MSPNP9093)
- includes vacuum hose and computer cable!
- It's used
$215 - Tom's motorsports CF bucket seat
- no brackets/sliders
- BRAND SPANKIN NEW!
- got it from someone on this board but never installed due to lack of fab skills =(
-its very pretty
$40 - RX7 AFM
- Who in their right mind would UPGRADE their shitty AFM to a better-but-still-shitty AFM when they can get do an AFM-delete? Scroll up to buy MSPNP
$100 (pending to jamessomething)- Stock daisy wheels w/center caps
- PLENTY OF TREAD!
$15 - Stock NA intake
- includes snorkel and airbox, but not the crossover tube
- someone just buy it to help a brotha out?
$15 - Spare wheel
- buy it to help a brotha out?
- comes with the cover AND the bolt, so you can tie it down right!
$100 - Used SR20 T25 turbo
- I got it from someone on this board, but it wasn't in the condition as advertised
- Blades are in EXCELLENT shape
- No play side-to-side or in/out, but it doesnt spin good. I'm pretty sure it's because the nut is tightened a little too much.
- Don't take my word for it because I'm not a turbo master!!
$10 (or free...) - NA Sun Visors
- I accept donations?
- Just take these away from me, but leave me some sort of compensation!
All items located in Inland Empire, CA. (City of Perris to be exact). Convenient pickup for those of you who go to Inland Drift.
I can ship any of it (except the wheels), but you cover the shipping costs.
Prices are without shipping. I prefer local pickup anyhow so you can check them out for yourself in person and determine whether you REALLY want them or not.
ALL PRICES ARE OBO! But don't be surprised if I say no, hahaha. I'm a pretty reasonable guy, but some people lowball like whoa.
Keep in mind that:
You are taking advantage of a poor college student who happens to be in a bad situation!!! I would be keeping some of this stuff (I<3MSPNP,T25,seat) but I have no choice.. sadly..
Last edited by hensonator; 09-03-2009 at 07:39 PM. Reason: location. / added item
#6
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: SoCal
Posts: 68
Total Cats: 0
Honestly, I don't really know, hahaha.
What I can tell you is that it is the one made by Jackson Racing (not moss motors), and that it has been through 3 owners (me being the third.)
It used to belong to a guy on cr.net with the username of: epikeddie.
First owner had it installed by Brainstorm Performance (back when they were still in business), then it was taken off, and sold to the second owner. The second owner then sold it to me.
However, I never installed it b/c it was sort of an impulse buy on my part
and I realized that it was blasphemous to the B6 engine (which should be turbo'ed, not supercharged!!!)
I did get to drive the previous owners car w/the SC on it, and it was pretty awesome I must say. First time ever driving a SC'ed car, and it pulled strong.
It didn't have the 'throw you in the back of the seat' factor like turbo'ed cars have, but I guess you could say it had a smoother rounder power band (like that of a bigger displacement NA car). Thought that SC whine was kinda gay at first too, but it grew on me.
What I can tell you is that it is the one made by Jackson Racing (not moss motors), and that it has been through 3 owners (me being the third.)
It used to belong to a guy on cr.net with the username of: epikeddie.
First owner had it installed by Brainstorm Performance (back when they were still in business), then it was taken off, and sold to the second owner. The second owner then sold it to me.
However, I never installed it b/c it was sort of an impulse buy on my part
and I realized that it was blasphemous to the B6 engine (which should be turbo'ed, not supercharged!!!)
I did get to drive the previous owners car w/the SC on it, and it was pretty awesome I must say. First time ever driving a SC'ed car, and it pulled strong.
It didn't have the 'throw you in the back of the seat' factor like turbo'ed cars have, but I guess you could say it had a smoother rounder power band (like that of a bigger displacement NA car). Thought that SC whine was kinda gay at first too, but it grew on me.
#7
Honestly, I don't really know, hahaha.
What I can tell you is that it is the one made by Jackson Racing (not moss motors), and that it has been through 3 owners (me being the third.)
It used to belong to a guy on cr.net with the username of: epikeddie.
First owner had it installed by Brainstorm Performance (back when they were still in business), then it was taken off, and sold to the second owner. The second owner then sold it to me.
However, I never installed it b/c it was sort of an impulse buy on my part
and I realized that it was blasphemous to the B6 engine (which should be turbo'ed, not supercharged!!!)
I did get to drive the previous owners car w/the SC on it, and it was pretty awesome I must say. First time ever driving a SC'ed car, and it pulled strong.
It didn't have the 'throw you in the back of the seat' factor like turbo'ed cars have, but I guess you could say it had a smoother rounder power band (like that of a bigger displacement NA car). Thought that SC whine was kinda gay at first too, but it grew on me.
What I can tell you is that it is the one made by Jackson Racing (not moss motors), and that it has been through 3 owners (me being the third.)
It used to belong to a guy on cr.net with the username of: epikeddie.
First owner had it installed by Brainstorm Performance (back when they were still in business), then it was taken off, and sold to the second owner. The second owner then sold it to me.
However, I never installed it b/c it was sort of an impulse buy on my part
and I realized that it was blasphemous to the B6 engine (which should be turbo'ed, not supercharged!!!)
I did get to drive the previous owners car w/the SC on it, and it was pretty awesome I must say. First time ever driving a SC'ed car, and it pulled strong.
It didn't have the 'throw you in the back of the seat' factor like turbo'ed cars have, but I guess you could say it had a smoother rounder power band (like that of a bigger displacement NA car). Thought that SC whine was kinda gay at first too, but it grew on me.
#16
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: SoCal
Posts: 68
Total Cats: 0
I'm a 29" waist and it fits me pretty snug, but I think up to about 32"ish will be fine. Anything higher, you might still fit, but it might be uncomfortable?
I don't have ANY mounts for it at all.
How much it will lower ride height depends on how you mount the seat.
You can get universal seat brackets anywhere (ebay, motorsport shops, etc.), and get them to work with your stock sliders, but you will probably retain the same ride height.
The easiest way to get low is to have them bolted to floor, but you will lack the adjustability of having sliders.
But that seems to be the trade off with bucket seats in a miata unless you have fabbing skills, a shop/person who'll fab something up for you, drop some $$$ to buy some expensive sliders, or have them bolted to the floor.
#17
hey this is the exact MS 90-93 you buy off diyautotune.com
brand new never used/installed? does it come with everything included as per advertised?
Thanks Brandon
email me at syco14@hotmail.com
brand new never used/installed? does it come with everything included as per advertised?
Thanks Brandon
email me at syco14@hotmail.com
#18
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: SoCal
Posts: 68
Total Cats: 0
hey this is the exact MS 90-93 you buy off diyautotune.com
brand new never used/installed? does it come with everything included as per advertised?
Thanks Brandon
email me at syco14@hotmail.com
brand new never used/installed? does it come with everything included as per advertised?
Thanks Brandon
email me at syco14@hotmail.com
#20
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: SoCal
Posts: 68
Total Cats: 0
I weighed it on my bathroom scale, but you should probably take that measurement with a grain of salt.
It was pretty difficult to weigh since the seat kept covering the numbers, but I read ~13 lbs. I don't know how much a stock seat weighs, but holding the CF seat after holding the stock seat feels feather light.
From the tips of the wing to wing, it's 22.5" wide measuring straight across.
It's kind of hard to measure myself shoulder to shoulder, but I measured ~18 inches straight across as well. Maybe give or take half an inch or so.
If you're around 18" wide, then it's perfect shoulder wise. IMO, it hugs me perfectly at the shoulders, while being a little looser at the hips and thighs.
I wish I had the exact dimensions so I don't have to go around guestimating everything.