bp/b6 stuff [FS] other goodies too
#1
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
bp/b6 stuff [FS] other goodies too
om im trying to clean out my garage so i can actully work on my car with out bumping into everything all prices are OBO i take paypal but would perfer you use the "gift" option so i dont get killed with fees. PLEASE SPECIFY IF YOU WANT INSURANCE ON SHIPPING I WILL NOT BE RESPONSIBLE FOR DAMAGED OR MISSING items
Next up is a BP egt head i got with my gtx motor. the previous owner had ported it him self, i would recomed maybe haveing the head looked at by a machine shop before slapping it on. head is complete with cams and valve cover, dizzy missing vc bolts 60+shipping
mx-3 intake manifold, i was going to modify this to maybe work with my b6t. this is not a bolt on application for a b6t you would need to add a fuel rail and injector bungs or get a mx3 1.6 dohc head. 15+shipping
MSD timing ignition retard box. this is good for fine tuning your timing or adjusting to different octane, i was going to use this on my mustang. its used but in good working order. this IS NOT A BTM 55+shipping part numember 8580
CLEAN set of hla's from a bp 1.8 theyve been sitting in oil since ive had them, will be shipped in ziploc bag complete set of 16 20+ shipping
BP a/c compressor not sure of conditon came with gtx motor 5+shipping
left over aspire spindles right and left side one has damage threads and can probably be fixed with lh tap. missing some studs too. 5+shipping
saab or xr2? rubber coupler. BPT metal charge pipe 30+shipping
plug wires that came with my gtx bpt, possibly jdm aftermarket? 10+shipping
xr2 altantor off my b6t,im not sure of the condition it spins freely but make a little noise its been sitting for a while 15+ shippinh
xr2 starter not sure of conditon came with motor 10+ shipping
Next up is a BP egt head i got with my gtx motor. the previous owner had ported it him self, i would recomed maybe haveing the head looked at by a machine shop before slapping it on. head is complete with cams and valve cover, dizzy missing vc bolts 60+shipping
mx-3 intake manifold, i was going to modify this to maybe work with my b6t. this is not a bolt on application for a b6t you would need to add a fuel rail and injector bungs or get a mx3 1.6 dohc head. 15+shipping
MSD timing ignition retard box. this is good for fine tuning your timing or adjusting to different octane, i was going to use this on my mustang. its used but in good working order. this IS NOT A BTM 55+shipping part numember 8580
CLEAN set of hla's from a bp 1.8 theyve been sitting in oil since ive had them, will be shipped in ziploc bag complete set of 16 20+ shipping
BP a/c compressor not sure of conditon came with gtx motor 5+shipping
left over aspire spindles right and left side one has damage threads and can probably be fixed with lh tap. missing some studs too. 5+shipping
saab or xr2? rubber coupler. BPT metal charge pipe 30+shipping
plug wires that came with my gtx bpt, possibly jdm aftermarket? 10+shipping
xr2 altantor off my b6t,im not sure of the condition it spins freely but make a little noise its been sitting for a while 15+ shippinh
xr2 starter not sure of conditon came with motor 10+ shipping
#2
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
The start of what was to be a custom b6t intake. 4 runners, the start of one flange, and a stick of high temp resistan phenolic plastic which i was going to turn on a lathe to make injector bungs to prevent the gas from boiling in the injector. 45+ shipping (the plastic alone was 80 bucks)
Fuel pressure gauge i believe its 1/8npt liquid filled. for mouting on a fuel rail or regulator. 12+ shipping
Brand new melling oil pump, the box got destroyed and im not sure of the melling part numember. i orded this pump for my b6t (93 capri xr-2) but i think it is the same pump as the BP pump. i compared this pump to my Boundarry Engineneering pump and physically they are identical. but im not sure if they share the same pressure spring? 80+ shipping
for refference i took a pic of this pump with my BE pump the shinny one is the BE and not for sale.
Night ranger venom helicopter, this is a 4 chanel helicopter. it is missing a few things. the battery pack for the remote is missing and the charger adapter for the battery is missing. You should be able to get these parts from a local hobby store or online. it been sitting in storage for a while 35+ shipping
Fuel pressure gauge i believe its 1/8npt liquid filled. for mouting on a fuel rail or regulator. 12+ shipping
Brand new melling oil pump, the box got destroyed and im not sure of the melling part numember. i orded this pump for my b6t (93 capri xr-2) but i think it is the same pump as the BP pump. i compared this pump to my Boundarry Engineneering pump and physically they are identical. but im not sure if they share the same pressure spring? 80+ shipping
for refference i took a pic of this pump with my BE pump the shinny one is the BE and not for sale.
Night ranger venom helicopter, this is a 4 chanel helicopter. it is missing a few things. the battery pack for the remote is missing and the charger adapter for the battery is missing. You should be able to get these parts from a local hobby store or online. it been sitting in storage for a while 35+ shipping
Last edited by Hot_Wheels; 11-14-2009 at 06:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM