91 1.6l turbo complete part out.
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2010
Location: Plainfield il
Posts: 226
Total Cats: 0
91 1.6l turbo complete part out.
Well the misses says the other lady has to go
This has been my on and off again project for the last 7 years and its time to give up one toy to keep another. So the miata must go so i can keep the the Buell. I had listed the car for awhile locally but gained little interested just selling it as a whole car so here comes the part out or if someone here is interested in the buying it all at a very discounted price. The car currently runs and drive fine just needs a better tune do to adding new injctors after the RC550 decided to completely fail.
fully built 1.6l ( 30psi capable/ 20 psi daily)
23k on the motor
8k on the head
wesco forged pistons 9:1
Carillo Rods
ARP Head Studs
Multi angle valve job
SS Intake and Exhaust Valves
Titanium Valve Spring Retainers
Metal Head gasket
Fidanza light weight flywheel
ACT Stage 3 unsprung clutch
Looking to get $2000 and will bve the driving factor to move forward with the part out of the rest of the car. So when the motor sells all other parts sell.
T25 Custom built turbo ($300)
SS separate gas DP ($200)
denso 720cc injectors ($200)
Newly built COP setup ( $150)
Mishimoto Racing Aluminum radiator ( $150)
Huge unknown front mount intercooler ( $100)
Mspnp2 1.6l w/ laptop and cords ($700)
KYB shocks w/ racing beat springs ( $200)
Complete set of control arms with poly bushing installed along with grease fittings ($300)
Coolant reroute setup ($100)
Frame rails along with butterfly brace ( $300)
1.8 brake upgrade with slotted rotors ( $200)
1.8 open diff with axels and poly bushings ($300)
Tenzo Version5 steering wheel ( $100)
Hard dog double diag roll bar ( $350)
Lc-1 wide band ($100)
CXracing's idea of a T25 turbo with custom fabbed DP ($150)
Racing Beat rear sway bar ($150)
Custom made bikini top ($150)
Wife bought me a sewing machine for Bday a year back and I decided to make my own top rather than buy one. I'm a bad **** on the sewing machine
Drag 15" Rims and Tires with maybe 1k on them ( $400)
Old school cast log type turbo manifold from Flyin Miata ( $100)
Three point strut bar ($100)
Adjustable cam gear ($50)
Billet Pulleys ($50)
Denso TORQ 850cc injectors ($150)
More parts to come ...
Again not parting it all unless the Motor sells! Any issue with prices let me know and prices are not including shipping or paypal fees.
Pictures upon request
Any questions feel free to email or text (7 zero 8 six 3 eight 2 eight 7 one)
Last edited by Tony the Tiger; 09-14-2015 at 10:42 AM. Reason: added pic and items
#10
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2010
Location: Plainfield il
Posts: 226
Total Cats: 0
PICS and PARTS added!!!!!
I have a local guy coming to hear the motor run today so that might kick start the part out.
Zoom: You second in line if the local guy that called idbs on the log falls thru
93shadow: Consider yourself third in line if the first two fall thru
Ian Rasch: Yes to the wide band its a LC-1 gauge/ and sensor $100 beans + shipping
DannyGeorge: Sorry the wheel is a Tenzo Version5, you have first dibs on the COPS and reroute setup
nbdooey: The T25 was built by a local shop in Darien,IL. the shopp did alot of work for me here and there. The 720cc injectors are PNP and i ran them for 50miles? They were bought from a injector shop and were just matched and flow tested.
F575gtc: Pics were added and consider your self 4th inline
DanBrown: The fuel pump is a WalBro 255 and looking to get ($50 + shipping) when the motor sells , has about 2k on the pump
I have a local guy coming to hear the motor run today so that might kick start the part out.
Zoom: You second in line if the local guy that called idbs on the log falls thru
93shadow: Consider yourself third in line if the first two fall thru
Ian Rasch: Yes to the wide band its a LC-1 gauge/ and sensor $100 beans + shipping
DannyGeorge: Sorry the wheel is a Tenzo Version5, you have first dibs on the COPS and reroute setup
nbdooey: The T25 was built by a local shop in Darien,IL. the shopp did alot of work for me here and there. The 720cc injectors are PNP and i ran them for 50miles? They were bought from a injector shop and were just matched and flow tested.
F575gtc: Pics were added and consider your self 4th inline
DanBrown: The fuel pump is a WalBro 255 and looking to get ($50 + shipping) when the motor sells , has about 2k on the pump
#20
Junior Member
Thread Starter
iTrader: (4)
Join Date: Feb 2010
Location: Plainfield il
Posts: 226
Total Cats: 0
Sparkyy. The controls include all the arms with poly bushings and grease serts you also have first dibs on the pulleys. Tear down starts this week so I will get back to you.
F575gtc. Not sure on the make, bought from another member sometime back and never installed.
Whinin. The guy that taken into motor is possibly taking the cops, will let you know
Hot wheels. Pm responded
90civichb. Yep denso 720's and the TORQ's
Motocar. Pm replied
Jon effin Dan. The bikini top is still here. But there is one area that is rough, the material lifted from the fabric the top still functions but the material under the black shows thru.
Miatamak. Not shipping tha big monster out that far, will cost you more in shipping than what you can get it new for.
Cheeseclock. Let me know if your still interested.
F575gtc. Not sure on the make, bought from another member sometime back and never installed.
Whinin. The guy that taken into motor is possibly taking the cops, will let you know
Hot wheels. Pm responded
90civichb. Yep denso 720's and the TORQ's
Motocar. Pm replied
Jon effin Dan. The bikini top is still here. But there is one area that is rough, the material lifted from the fabric the top still functions but the material under the black shows thru.
Miatamak. Not shipping tha big monster out that far, will cost you more in shipping than what you can get it new for.
Cheeseclock. Let me know if your still interested.