Begi-S Kit Part Out 1999-2000, Emanage Blue, Boomslang Harness
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Sunnyvale, ca
Posts: 220
Total Cats: 0
Begi-S Kit Part Out 1999-2000, Emanage Blue, Boomslang Harness
Hey, guys I am going to go ahead and part out the Begi S kit I have been trying to sell. The intercooler, piping, bov, clamps are gone.. I still have pretty much everything else. All the turbo stuff I am selling was on the car for about 2,000 miles and the turbo was run with the wastegate actuator open so no boost was made. I am selling all the stuff OBO, but PLEASE dont low ball me. I am already taking a huge loss on the kit even though its essentially like new.
Exhaust Manifold - $350
Garrett T2554 Turbo (Same turbo BEGI offers with the kits, ball bearing, oil and water cooled, with all 4 drain adapters included as well as the wastegate signal line) - $650
Begi-S Style Down Pipe (With extra bung welded on for wideband o2) -$225
Begi-S Original Crossover Tubing with hoses and clamps (Plumbing from turbo to throttle body) - $50
Rubber oil, and water lines (2 water, 2 oil), Brass fittings for oil supply, two splicing typed fittings for water source and return - ($50)
Greddy Emanage Blue with Boomslang Harness for 99-00 Miata. Comes with 3 bar Greddy sensor. Previously was used for spark and fuel control in a srt-4 with different harness (I knew the guy). I threw it on the car, didn’t idle (but cranked and communicated with pc) I didn’t troubleshoot, pulled it out, put it on the shelf and am now selling it. Should be a flawless EMB; someone good with this stuff will have no problem with getting this to work, I bet. I bought the EMB for 400, and the Boomslang PNP harness for 190. My loss your gain. - $250
Thanks for looking!
Henry
Exhaust Manifold - $350
Garrett T2554 Turbo (Same turbo BEGI offers with the kits, ball bearing, oil and water cooled, with all 4 drain adapters included as well as the wastegate signal line) - $650
Begi-S Style Down Pipe (With extra bung welded on for wideband o2) -$225
Begi-S Original Crossover Tubing with hoses and clamps (Plumbing from turbo to throttle body) - $50
Rubber oil, and water lines (2 water, 2 oil), Brass fittings for oil supply, two splicing typed fittings for water source and return - ($50)
Greddy Emanage Blue with Boomslang Harness for 99-00 Miata. Comes with 3 bar Greddy sensor. Previously was used for spark and fuel control in a srt-4 with different harness (I knew the guy). I threw it on the car, didn’t idle (but cranked and communicated with pc) I didn’t troubleshoot, pulled it out, put it on the shelf and am now selling it. Should be a flawless EMB; someone good with this stuff will have no problem with getting this to work, I bet. I bought the EMB for 400, and the Boomslang PNP harness for 190. My loss your gain. - $250
Thanks for looking!
Henry
Thread
Thread Starter
Forum
Replies
Last Post