FS: 1.8 Liter Miata Turbo Kit plus Hydra EMS and 550cc Injectors.
#1
Senior Member
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Location: Houston, TX
Posts: 811
Total Cats: 0
FS: 1.8 Liter Miata Turbo Kit plus Hydra EMS and 550cc Injectors.
I also have a Hydra EMS and 550 CC Injectors. The Hydra is PNP for the 01+ Miata, but you can purchase a harness from Hydra if you wish to use it on any year miata or any other non-DBW application that Hydra currently supports. Injectors are high impedance denso style 550's. They were flow tested just about 3 months ago, but I have lost the chart. They were all between 548 and 551. The Hydra also comes with the WB02 sensor and harness, the sensor cross threaded on the way out of the old downpipe, and the threads are a little mangled, but it can be made to work with a little bit of time. Also comes with the boost control solenoid.
I am looking for $1500 for the Hydra with the O2 and Solenoid.. I paid just over 2000 for this setup just about 2 months ago.
I would like $200 OBO for the injectors, they retail for about 350, and they have like 2000 miles on them. I will include the whole fuel injector harness for the 01+ miata, so that you do not have to cut yours. It will be a PnP experience.
All prices are OBO.
I am looking for $1500 for the Hydra with the O2 and Solenoid.. I paid just over 2000 for this setup just about 2 months ago.
I would like $200 OBO for the injectors, they retail for about 350, and they have like 2000 miles on them. I will include the whole fuel injector harness for the 01+ miata, so that you do not have to cut yours. It will be a PnP experience.
All prices are OBO.
Last edited by nester; 09-03-2007 at 01:56 PM. Reason: Remove turbo kit.. it's sold!
#3
I sent you a pm yesterday and still no reply. Let me know if you got my pm.
#5
Im looking to do a turbo on my 2000 1.8l. So I am very interested. It has everything I need to run low boost and start a turbo setup right?
#7
Senior Member
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Location: Houston, TX
Posts: 811
Total Cats: 0
The only thing you'll need is a different WG spring. Currently it has a .6 bar spring which is about 8.7 psi.. I'd recommend a .4 bar spring for starters.. that's 5.8psi...
I ran a 14.2 in the quarter on .4 bar.
WG spring runs about $30 bucks. If you buy the kit, I will purchase this for you. Will take me about 3 days to get it here.. And if someone buys soon, I might even throw in a free AEM wideband which has a street value (new) of about 265 or more..
#8
awesome. I am in Issaquah washington. Where are you?
#10
ok, I actually have a friend that lives in that area. would it be ok if he stopped by to check out the condition of the parts?
Thread
Thread Starter
Forum
Replies
Last Post
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM