90 Turbo part out
#1
Senior Member
Thread Starter
iTrader: (10)
Join Date: Jul 2009
Location: Oakdale, CA
Posts: 1,394
Total Cats: 123
90 Turbo part out
Parting out my turbo setup, possibly the whole car. Its a 90 Miata with a 1.6. All of this has zero miles. The hotside has been bolted up, has a few scratches in it. It has also been started and ran to set idle/timing. But no road miles.
-ARTech:
Bottom mount T3 log manifold w/ EWG (non P/S)
1" EWG dump tube
3" 5 bolt downpipe with v-band
$900 plus shipping/ $1100 with Tial wastegate (listed below)
-New eBay T3/T4 turbo, .50/.63 a/r, journal bearing, oil only. No IWG
$80 plus shipping (never been ran)
-Tial MVS 38mm water cooled wastegate. Will include all springs, its purple.
$200 plus shipping. (I would like to keep it with the manifold because the v-band flange is already welded on, a new flange can be bought)
-COPs, complete setup, I bought these off a MT.net member, built by Savington
$200 plus shipping SOLD
DIY intercooler setup (if anyone is interested I will get pics and a price)
MOMO Start 2007 mfg. 11/2010 FIA certified. Looks new, has one burn hole in the bottom from a stray spark.
$250 plus shipping
90-93 MSPNP modded by Reverant with MSII board w/ tuning cable
$580 plus shipping SOLD
Pictures will be up tonight or tomorrow. Again this is all for a 90 Miata with a 1.6
Thanks,
Ryan
-ARTech:
Bottom mount T3 log manifold w/ EWG (non P/S)
1" EWG dump tube
3" 5 bolt downpipe with v-band
$900 plus shipping/ $1100 with Tial wastegate (listed below)
-New eBay T3/T4 turbo, .50/.63 a/r, journal bearing, oil only. No IWG
$80 plus shipping (never been ran)
-Tial MVS 38mm water cooled wastegate. Will include all springs, its purple.
$200 plus shipping. (I would like to keep it with the manifold because the v-band flange is already welded on, a new flange can be bought)
-COPs, complete setup, I bought these off a MT.net member, built by Savington
$200 plus shipping SOLD
DIY intercooler setup (if anyone is interested I will get pics and a price)
MOMO Start 2007 mfg. 11/2010 FIA certified. Looks new, has one burn hole in the bottom from a stray spark.
$250 plus shipping
90-93 MSPNP modded by Reverant with MSII board w/ tuning cable
$580 plus shipping SOLD
Pictures will be up tonight or tomorrow. Again this is all for a 90 Miata with a 1.6
Thanks,
Ryan
Last edited by RyanRaduechel; 08-30-2011 at 08:25 PM.
#15
Senior Member
Thread Starter
iTrader: (10)
Join Date: Jul 2009
Location: Oakdale, CA
Posts: 1,394
Total Cats: 123
bump
@turbobluemiata, its a DIY spacerless reroute if you are interested. Would require drilling your cylinder head for the heater core line. You may also me able to get or make a spacer to make it work.
@turbobluemiata, its a DIY spacerless reroute if you are interested. Would require drilling your cylinder head for the heater core line. You may also me able to get or make a spacer to make it work.
#16
hey wasup
Parting out my turbo setup, possibly the whole car. Its a 90 Miata with a 1.6. All of this has zero miles. The hotside has been bolted up, has a few scratches in it. It has also been started and ran to set idle/timing. But no road miles.
-ARTech:
Bottom mount T3 log manifold w/ EWG (non P/S)
1" EWG dump tube
3" 5 bolt downpipe with v-band
$900 plus shipping/ $1100 with Tial wastegate (listed below)
-New eBay T3/T4 turbo, .50/.63 a/r, journal bearing, oil only. No IWG
$80 plus shipping (never been ran)
-Tial MVS 38mm water cooled wastegate. Will include all springs, its purple.
$200 plus shipping. (I would like to keep it with the manifold because the v-band flange is already welded on, a new flange can be bought)
-COPs, complete setup, I bought these off a MT.net member, built by Savington
$200 plus shipping SOLD
DIY intercooler setup (if anyone is interested I will get pics and a price)
MOMO Start 2007 mfg. 11/2010 FIA certified. Looks new, has one burn hole in the bottom from a stray spark.
$250 plus shipping
90-93 MSPNP modded by Reverant with MSII board w/ tuning cable
$580 plus shipping
Pictures will be up tonight or tomorrow. Again this is all for a 90 Miata with a 1.6
Thanks,
Ryan
-ARTech:
Bottom mount T3 log manifold w/ EWG (non P/S)
1" EWG dump tube
3" 5 bolt downpipe with v-band
$900 plus shipping/ $1100 with Tial wastegate (listed below)
-New eBay T3/T4 turbo, .50/.63 a/r, journal bearing, oil only. No IWG
$80 plus shipping (never been ran)
-Tial MVS 38mm water cooled wastegate. Will include all springs, its purple.
$200 plus shipping. (I would like to keep it with the manifold because the v-band flange is already welded on, a new flange can be bought)
-COPs, complete setup, I bought these off a MT.net member, built by Savington
$200 plus shipping SOLD
DIY intercooler setup (if anyone is interested I will get pics and a price)
MOMO Start 2007 mfg. 11/2010 FIA certified. Looks new, has one burn hole in the bottom from a stray spark.
$250 plus shipping
90-93 MSPNP modded by Reverant with MSII board w/ tuning cable
$580 plus shipping
Pictures will be up tonight or tomorrow. Again this is all for a 90 Miata with a 1.6
Thanks,
Ryan
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM