Brand New BEGi turbo kit w/misc turbo parts
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Bakersfield, Ca
Posts: 154
Total Cats: 0
Brand New BEGi turbo kit w/misc turbo parts
Well it seems that I have "popped" my 1.6L engine before I got to get the turbo set-up on. So I maybe having to sell the turbo kit to make room for a 99 1.8L swap. Let me know on the interest.
All parts have ZERO miles and have never been installed! $2300 (cheap!) Trying to keep it as a kit, but will consider if I have buyers for EVERYTHING.
-BEGi "direct pulse" cast manifold (ceramic coating) $375
-Gt2554 BB turbo water and oil cooled (sold!)
-Seperated gas down pipe. (powder coating) $275
-stainless steel lines/Water lines $80
-charge piping, t-bolt clamps, couplers, small intercooler, K/N filter $300
-rising rate FPR $190
- boost gauge with mounting pod 65
- Turbo heat shield $55
- Bypass valve $65
Accessories
-MSD ignition retarding unit ($120) (paid $158+shipping)
-BEGi by pass valve #2 ($65) (paid $84 +shipping)
-310cc injectors ($50) (paid $50 from mangna)
-Devils own water injection set up with 2L fill tank. ($200) (paid $230 shipped)
*also have a greddy heat shield that has never been used. This thing is always sold out at FM. (sold!)
Remember guys. This stuff has 0 miles. Make me some offers/trades. Im interested in 1.8L parts mostly now.
Thanks!
Parts and buyers
-manifold = Loki
-downpipe = Loki
-oil+water lines = Loki
-Charge piping+misc parts = CarDriverX
-FPR = ?
-Boost Gauge + Mounting Pod = ?
-Turbo Heat Shield for T2554 turbo = SOLD! - Supra
-BEGi Bypass Valve (BOV) = ?
-MSD ignition retarding unit = ?
-Another BEGi bypass valve = ?
-310cc Injectors = ?
-Devil's Own Water Injection = ?
All parts have ZERO miles and have never been installed! $2300 (cheap!) Trying to keep it as a kit, but will consider if I have buyers for EVERYTHING.
-BEGi "direct pulse" cast manifold (ceramic coating) $375
-Gt2554 BB turbo water and oil cooled (sold!)
-Seperated gas down pipe. (powder coating) $275
-stainless steel lines/Water lines $80
-charge piping, t-bolt clamps, couplers, small intercooler, K/N filter $300
-rising rate FPR $190
- boost gauge with mounting pod 65
- Turbo heat shield $55
- Bypass valve $65
Accessories
-MSD ignition retarding unit ($120) (paid $158+shipping)
-BEGi by pass valve #2 ($65) (paid $84 +shipping)
-310cc injectors ($50) (paid $50 from mangna)
-Devils own water injection set up with 2L fill tank. ($200) (paid $230 shipped)
*also have a greddy heat shield that has never been used. This thing is always sold out at FM. (sold!)
Remember guys. This stuff has 0 miles. Make me some offers/trades. Im interested in 1.8L parts mostly now.
Thanks!
Parts and buyers
-manifold = Loki
-downpipe = Loki
-oil+water lines = Loki
-Charge piping+misc parts = CarDriverX
-FPR = ?
-Boost Gauge + Mounting Pod = ?
-Turbo Heat Shield for T2554 turbo = SOLD! - Supra
-BEGi Bypass Valve (BOV) = ?
-MSD ignition retarding unit = ?
-Another BEGi bypass valve = ?
-310cc Injectors = ?
-Devil's Own Water Injection = ?
Last edited by leshok; 10-02-2007 at 12:57 AM. Reason: Prices added
#6
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
of course, the obvious response is 1.6 or 1.8, and if 1.8 what if any EGR provisions
and are you looking to trade for a motor? i have a low mile 1.8 block (from a 96) with a low mile 2000 solid lifter head on top, with intake manifold (complete with all VICS stuff), NB fuel rail, and NA 1.8 FPR. Think I have the metal motor mounts as well. No cam cover. Cams should be polished at minimum. No starter, no alternator, no ps pump, no a/c compressor.
and are you looking to trade for a motor? i have a low mile 1.8 block (from a 96) with a low mile 2000 solid lifter head on top, with intake manifold (complete with all VICS stuff), NB fuel rail, and NA 1.8 FPR. Think I have the metal motor mounts as well. No cam cover. Cams should be polished at minimum. No starter, no alternator, no ps pump, no a/c compressor.
#20
Junior Member
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Location: Bakersfield, Ca
Posts: 154
Total Cats: 0
The devils own kit does not have a progressive controller.
Its the base kit, with the 5-12psi pressure switch.
Pics of the turbo stuff will be up in a few days guys. I'll be picking up the package from a buddies house when it arrives. From there I'll post pics and take orders and send stuff out...if it gets that far.
Gives you guys a few days to decide who wants what and so on. Keep it commin. PM me with any questions.
Its the base kit, with the 5-12psi pressure switch.
Pics of the turbo stuff will be up in a few days guys. I'll be picking up the package from a buddies house when it arrives. From there I'll post pics and take orders and send stuff out...if it gets that far.
Gives you guys a few days to decide who wants what and so on. Keep it commin. PM me with any questions.