Massive Part out: Turbo 97, 90 parts car. VVT block. Profit from my grief!
11-17-2011, 08:11 PM
#41
Newb
Join Date: May 2011
Posts: 7
Total Cats: 0
I am sorry to hear what happened I hope every thing turns out.
Looking for a couple body parts listed below.
1. Both turn signals that go in below the headlights.
2. The bracket that goes the width of the front end, it holds the top portion of the bumper cover to the radiator support.
3. A hood but I have no idea on the shipping cost is decent going to Seattle WA 98133
Please PM with prices
Thanks
Looking for a couple body parts listed below.
1. Both turn signals that go in below the headlights.
2. The bracket that goes the width of the front end, it holds the top portion of the bumper cover to the radiator support.
3. A hood but I have no idea on the shipping cost is decent going to Seattle WA 98133
Please PM with prices
Thanks
0
11-17-2011, 11:40 PM
#42
Senior Member
Thread Starter
iTrader: (9)
Join Date: Sep 2009
Location: Yamato Japan
Posts: 691
Total Cats: 26
Yes, FM has a template on their site for that purpose. Roll bar is being sold to a local guy who called dibs long ago, as soon as I can get home and get it removed.
I'll be back tomorrow night and can actually make some progress on this.
Shipping on big body parts will be nigh impossible and EXPENSIVE. If you're serious call greyhound and get an idea, expect over $100. If you can come up with arrangements however, I'll consider it.
I'll be back tomorrow night and can actually make some progress on this.
Shipping on big body parts will be nigh impossible and EXPENSIVE. If you're serious call greyhound and get an idea, expect over $100. If you can come up with arrangements however, I'll consider it.
0
11-18-2011, 10:47 PM
#44
Newb
Join Date: May 2011
Posts: 7
Total Cats: 0
I'll be back tomorrow night and can actually make some progress on this.
Shipping on big body parts will be nigh impossible and EXPENSIVE. If you're serious call greyhound and get an idea, expect over $100. If you can come up with arrangements however, I'll consider it.
Shipping on big body parts will be nigh impossible and EXPENSIVE. If you're serious call greyhound and get an idea, expect over $100. If you can come up with arrangements however, I'll consider it.
0
11-20-2011, 08:58 PM
#45
Senior Member
Thread Starter
iTrader: (9)
Join Date: Sep 2009
Location: Yamato Japan
Posts: 691
Total Cats: 26
Gentlemen,
I am back up and running! Thanks to the hospitality of Sixshooter and his lovely wife, I have a cream-puff of a Toyo 4runner for my daily duties, and a motivated buyer offered to give me a hand with some wrenching.
Anyone I talked to about turbo parts etc and I was afraid to take your money because the stuff was still in the car, ITS NOT. I have pulled the entire drivetrain.
Added Daisy wheels to first post
Sold list:
97 Tranny: sold
parts car dash: sold
97 Oil cooler/relocation: sold
97 nose/bumper
I am back up and running! Thanks to the hospitality of Sixshooter and his lovely wife, I have a cream-puff of a Toyo 4runner for my daily duties, and a motivated buyer offered to give me a hand with some wrenching.
Anyone I talked to about turbo parts etc and I was afraid to take your money because the stuff was still in the car, ITS NOT. I have pulled the entire drivetrain.
Added Daisy wheels to first post
Sold list:
97 Tranny: sold
parts car dash: sold
97 Oil cooler/relocation: sold
97 nose/bumper
0
11-21-2011, 01:26 PM
#46
Parts
Tasty Danish- Thanks for the parts, now i have some more wrenching to do on my car. Dash was dropped with Chris @0930 this morning.
Everyone else- After 8 hours of wrenching it's all torn apart and ready to be boxxed up and mailed out.
Everyone else- After 8 hours of wrenching it's all torn apart and ready to be boxxed up and mailed out.
0
12-07-2011, 11:27 PM
#54
Senior Member
Thread Starter
iTrader: (9)
Join Date: Sep 2009
Location: Yamato Japan
Posts: 691
Total Cats: 26
I told you the model in my last post and FM is REALLY good about support on this kind of thing. Much better than I could tell you. http://flyinmiata.com/support/ecu.php
If that doesn't help, call them^
I'm not passing the buck, but just saying that's the best info available on it.
If that doesn't help, call them^
I'm not passing the buck, but just saying that's the best info available on it.
0
12-08-2011, 01:38 AM
#55
Newb
Join Date: Nov 2011
Posts: 17
Total Cats: 0
john...your email is not working...can you shoot me a note at some point about your parts for sale...I have a 93 im boosting this winter. thanks don
0
12-08-2011, 09:07 AM
#56
Junior Member
Join Date: Oct 2010
Posts: 163
Total Cats: -26
Also interested in the turbo. Thanks
0
12-08-2011, 02:38 PM
#58
Junior Member
Join Date: Oct 2010
Posts: 163
Total Cats: -26
I have everything for the BEGI shanghai S, except the turbo.
Is yours easily adaptable to my plumbing? (that sounds kinda dirty).
My setup is set up for 5psi give or take. Turbo inlet is 2.5" outlet 2".
Is yours easily adaptable to my plumbing? (that sounds kinda dirty).
My setup is set up for 5psi give or take. Turbo inlet is 2.5" outlet 2".
Last edited by misfit77; 12-08-2011 at 02:48 PM.
0
12-08-2011, 04:48 PM
#59
Senior Member
Thread Starter
iTrader: (9)
Join Date: Sep 2009
Location: Yamato Japan
Posts: 691
Total Cats: 26
both my turbos are offered by begi as an upgrade to your system. Pick one. (BTW: 90% of turbo miata's are running one of those two, or a rip off of them).
EDIT: the 2554 IS the shanghai turbo. 2560 the upgrade.
EDIT: the 2554 IS the shanghai turbo. 2560 the upgrade.
0
12-08-2011, 04:54 PM
#60
Junior Member
Join Date: Oct 2010
Posts: 163
Total Cats: -26
I will take the Garrett 2554 turbo for $250. Paypal is ready.
I have all the fittings, studs and such.
It has a low psi wastegate, right? either way, its better wating for Begi to get theirs on back order.
I have all the fittings, studs and such.
It has a low psi wastegate, right? either way, its better wating for Begi to get theirs on back order.
0
