T25, BEGI manifold, FMII IC, BOV, oil lines....
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: San Diego CA
Posts: 399
Total Cats: 0
T25, BEGI manifold, FMII IC, BOV, oil lines....
In typical fashion as im about ready to install the turbo life throws a curve ball.
Anyways i need to unload a few things.
Everything i have was purchased from someone on this forum so most of this stuff is either New or barely used.
T25 turbo(240) - Journal Bearing, compressor outlet faces upward toward the hood. No shaft play was supposedly rebuilt before selling and i believe it. its clean, zero shaft play and looks good
BEGI manifold(350) - older style, with EGR port t25/25 flange
FMII intercooler & BOV(250) - purchased from Brandon at FM. Comes with all pipes, BOV and the IC. One of the brackets broke off, he sent it that way, but he said he had it mounted without that bracket with no problems. otherwise it can be easily welded up.
BEGI 2.5" Downpipe(250) - will fit BEGI or FM manifold brand new never used. flex section near the cat looks great
RX7 460cc injectors(40) - I have 8 19550-1350 injectors. connector is square not oval. 6 are low z and 2 are high z. not really expecting to sell these on here but just in case. they will fit and i do have 4 connectors, just need to add resistors.
Ill ship everything for free in the lower 48, but if you want tracking or insurance youll have to cover that. I will take a picture of the USPS receipt though just for peace of mind.
Anyways i need to unload a few things.
Everything i have was purchased from someone on this forum so most of this stuff is either New or barely used.
T25 turbo(240) - Journal Bearing, compressor outlet faces upward toward the hood. No shaft play was supposedly rebuilt before selling and i believe it. its clean, zero shaft play and looks good
BEGI manifold(350) - older style, with EGR port t25/25 flange
FMII intercooler & BOV(250) - purchased from Brandon at FM. Comes with all pipes, BOV and the IC. One of the brackets broke off, he sent it that way, but he said he had it mounted without that bracket with no problems. otherwise it can be easily welded up.
BEGI 2.5" Downpipe(250) - will fit BEGI or FM manifold brand new never used. flex section near the cat looks great
RX7 460cc injectors(40) - I have 8 19550-1350 injectors. connector is square not oval. 6 are low z and 2 are high z. not really expecting to sell these on here but just in case. they will fit and i do have 4 connectors, just need to add resistors.
Ill ship everything for free in the lower 48, but if you want tracking or insurance youll have to cover that. I will take a picture of the USPS receipt though just for peace of mind.
Last edited by teknikscian; 03-24-2008 at 12:31 AM.
#2
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: San Diego CA
Posts: 399
Total Cats: 0
pictures of most everything are here, i need to pull some stuff out of storage and then ill snap pics of the rest.
and my ebay feedback is 100% if you want to search for Teknikscian
http://s29.photobucket.com/albums/c2...ikscian/Miata/
and my ebay feedback is 100% if you want to search for Teknikscian
http://s29.photobucket.com/albums/c2...ikscian/Miata/
#19
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: San Diego CA
Posts: 399
Total Cats: 0
Yeah ill have to come check that out. shoot me an email or something when its finished
everything is gone thanks guys.. please send pics of them installed for memories.. i was attached to those parts lol!
everything is gone thanks guys.. please send pics of them installed for memories.. i was attached to those parts lol!