Moss MP62, DIYPNP, 550cc injectors, intercooler, small pulley +
05-01-2013, 02:51 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2011
Location: South Jersey
Posts: 95
Total Cats: 3
Moss MP62, DIYPNP, 550cc injectors, intercooler, small pulley +
Selling a Moss MP62. 20k (ish) miles.
Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT SOLD
Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV SOLD
DIYPNP , with sequential injection SOLD
Track dog racing 62.5 mm s/c nose pulley (14-17psi) SOLD
Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - SOLD
CXracing 11x11x3 top outlet intercooler. (Brand new never installed) SOLD
DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. Sold
Ultra shield ralley 17 in ( $200 local only)
Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $SOLD
Boss frog miata trunk sub (3 months) $150
Flyin miata resonated race pipe -new. SOLD
Hard dog hardcore single diag. (Hard top) bar $300 local only
IOport seat brace drilled once Sold
Flying miata CF headlight naca duct ( primed white) Sold
Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. Sold
If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , gone
Pictures when I get home to resize.
If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000
Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT SOLD
Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV SOLD
DIYPNP , with sequential injection SOLD
Track dog racing 62.5 mm s/c nose pulley (14-17psi) SOLD
Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - SOLD
CXracing 11x11x3 top outlet intercooler. (Brand new never installed) SOLD
DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. Sold
Ultra shield ralley 17 in ( $200 local only)
Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $SOLD
Boss frog miata trunk sub (3 months) $150
Flyin miata resonated race pipe -new. SOLD
Hard dog hardcore single diag. (Hard top) bar $300 local only
IOport seat brace drilled once Sold
Flying miata CF headlight naca duct ( primed white) Sold
Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. Sold
If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , gone
Pictures when I get home to resize.
If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000
Last edited by tuckntruck; 05-04-2013 at 01:57 PM.
Reply
1
1
05-01-2013, 04:11 PM
#6
DIYPNP + Injectors
Selling a Moss MP62. 20k (ish) miles.
Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT $1800
Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV $100
DIYPNP , with sequential injection $300
Track dog racing 62.5 mm s/c nose pulley (14-17psi) $65
Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - $ 120
CXracing 11x11x3 top outlet intercooler. (Brand new never installed) $90
DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. $350
Ultra shield ralley 17 in ( $200 local only)
Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $100
Boss frog miata trunk sub (3 months) $150
Flyin miata resonated race pipe -new. $65
Hard dog hardcore single diag. (Hard top) bar $300 local only
IOport seat brace drilled once $65
Flying miata CF headlight naca duct ( primed white) $65
Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. $70
If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , $2600.
Pictures when I get home to resize.
If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000
Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT $1800
Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV $100
DIYPNP , with sequential injection $300
Track dog racing 62.5 mm s/c nose pulley (14-17psi) $65
Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - $ 120
CXracing 11x11x3 top outlet intercooler. (Brand new never installed) $90
DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. $350
Ultra shield ralley 17 in ( $200 local only)
Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $100
Boss frog miata trunk sub (3 months) $150
Flyin miata resonated race pipe -new. $65
Hard dog hardcore single diag. (Hard top) bar $300 local only
IOport seat brace drilled once $65
Flying miata CF headlight naca duct ( primed white) $65
Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. $70
If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , $2600.
Pictures when I get home to resize.
If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000
I'll take the DIYPNP assuming it the DIYPNPN76-K Kit assembled and likely the Injectors. Give me your price on both + shipped to 45140.
I'll get your PM or you can email me at bhurd@gmail.com
Thanks.
Reply
0
0
05-01-2013, 05:18 PM
#7
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2011
Location: South Jersey
Posts: 95
Total Cats: 3
Sorry for no PM. Not enough posts yet.
I'll take the DIYPNP assuming it the DIYPNPN76-K Kit assembled and likely the Injectors. Give me your price on both + shipped to 45140.
I'll get your PM or you can email me at bhurd@gmail.com
Thanks.
I'll take the DIYPNP assuming it the DIYPNPN76-K Kit assembled and likely the Injectors. Give me your price on both + shipped to 45140.
I'll get your PM or you can email me at bhurd@gmail.com
Thanks.
What's your wideband?
I'm mostly going to be shipping USPS flat rate ( what fits). , those together woud go in the medium box which is $10( rounded off).
So $430 for both. It's the de
Reply
0
0
05-01-2013, 06:49 PM
#9
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2011
Location: South Jersey
Posts: 95
Total Cats: 3
I hadn't intended to part this out, but, the *perfect* house according to my wife ( we did need more space) came on the market.
That being said, if it takes me a little while to respond, bear with me, and I'll ask that you hold your paypal payments until I'm actually ready to ship each part.
Just check in on here to claim it, and I'll send a pm when it's ready to go. I'd like to keep it in the thread, to make sure that there is an order to everything.
I'll also try again to post pictures tonight
Jared,
Reply
0
0
05-01-2013, 07:19 PM
#11
It's the denso 76 pin, assembled and decently tuned for mine, not sure what your set up is, but likely idle and timing tweaks would be it...
What's your wideband?
I'm mostly going to be shipping USPS flat rate ( what fits). , those together woud go in the medium box which is $10( rounded off).
So $430 for both. It's the de
What's your wideband?
I'm mostly going to be shipping USPS flat rate ( what fits). , those together woud go in the medium box which is $10( rounded off).
So $430 for both. It's the de
First dibs...
Reply
0
0
05-02-2013, 12:07 AM
#13
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2011
Location: South Jersey
Posts: 95
Total Cats: 3
In similar tones though, wife found the *perfect* house... Therefore the miata goes.
Reply
0
0
05-02-2013, 06:55 AM
#14
I'd love to work something out for the harddog, and I could probably use that intercooler lol. My work is in Deptford, maybe 20-30 minutes from Marlton depending on 295 traffic. Yeah you can pick any weekend though and come use it (Our mechanic only works Mon-Fri) ... Hahaha yeah the situation does seem similar. We just bought a little "too much" house, and we couldn't take on two car payments.... same thing though, *perfect* house haha
Reply
0
0
05-02-2013, 08:51 AM
#15
Jared,
Again, sorry but I can't even reply to your PM until I get to the magic 15 posts.
Please ship it UPS on Monday. For me the postal service doesn't work reliably and if there's a signature involved it means a trip to the local PO because I travel a lot and my wife works. This usually adds 1-3 days.
So, UPS it is thanks.
Brian
Again, sorry but I can't even reply to your PM until I get to the magic 15 posts.
Please ship it UPS on Monday. For me the postal service doesn't work reliably and if there's a signature involved it means a trip to the local PO because I travel a lot and my wife works. This usually adds 1-3 days.
So, UPS it is thanks.
Brian
Reply
0
0
05-03-2013, 10:01 AM
#19
Newb
Join Date: Nov 2011
Posts: 40
Total Cats: 2
PM's not working for me either till I hit 15 posts... Please PM me with your e-mail or just e-mail me at x96nax@gmail.com
I'm interested in;
*the Moss sc kit,
*Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV.
*Flyin miata resonated race pipe
*Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps
*Track dog racing 62.5 mm s/c nose pulley
*Schroth profile ii ASM with 6pt anti sub, press to release street legal cam
Would you happen to have the CARB EO sticker for the Moss kit?
How much for these shipped to 94109?
I'm interested in;
*the Moss sc kit,
*Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV.
*Flyin miata resonated race pipe
*Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps
*Track dog racing 62.5 mm s/c nose pulley
*Schroth profile ii ASM with 6pt anti sub, press to release street legal cam
Would you happen to have the CARB EO sticker for the Moss kit?
How much for these shipped to 94109?
Last edited by X96naX; 05-03-2013 at 10:21 AM.
Reply
0
0
