Moss MP62, DIYPNP, 550cc injectors, intercooler, small pulley +
6 Attachment(s)
Selling a Moss MP62. 20k (ish) miles.
Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT SOLD Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV SOLD DIYPNP , with sequential injection SOLD Track dog racing 62.5 mm s/c nose pulley (14-17psi) SOLD Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - SOLD CXracing 11x11x3 top outlet intercooler. (Brand new never installed) SOLD DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. Sold Ultra shield ralley 17 in ( $200 local only) Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $SOLD Boss frog miata trunk sub (3 months) $150 Flyin miata resonated race pipe -new. SOLD Hard dog hardcore single diag. (Hard top) bar $300 local only IOport seat brace drilled once Sold Flying miata CF headlight naca duct ( primed white) Sold Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. Sold If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , gone Pictures when I get home to resize. If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000 |
2 Attachment(s)
I'll add, prices do not include shipping.
|
Location would be helpful.
C |
Good call, south jersey, marlton
|
2 Attachment(s)
A few pictures.
* apparently not working well, more tonight when I'm not at work |
DIYPNP + Injectors
Originally Posted by tuckntruck
(Post 1007446)
Selling a Moss MP62. 20k (ish) miles.
Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT $1800 Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV $100 DIYPNP , with sequential injection $300 Track dog racing 62.5 mm s/c nose pulley (14-17psi) $65 Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - $ 120 CXracing 11x11x3 top outlet intercooler. (Brand new never installed) $90 DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. $350 Ultra shield ralley 17 in ( $200 local only) Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $100 Boss frog miata trunk sub (3 months) $150 Flyin miata resonated race pipe -new. $65 Hard dog hardcore single diag. (Hard top) bar $300 local only IOport seat brace drilled once $65 Flying miata CF headlight naca duct ( primed white) $65 Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. $70 If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , $2600. Pictures when I get home to resize. If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000 I'll take the DIYPNP assuming it the DIYPNPN76-K Kit assembled and likely the Injectors. Give me your price on both + shipped to 45140. I'll get your PM or you can email me at bhurd@gmail.com Thanks. |
Originally Posted by bahurd
(Post 1007502)
Sorry for no PM. Not enough posts yet.
I'll take the DIYPNP assuming it the DIYPNPN76-K Kit assembled and likely the Injectors. Give me your price on both + shipped to 45140. I'll get your PM or you can email me at bhurd@gmail.com Thanks. What's your wideband? I'm mostly going to be shipping USPS flat rate ( what fits). , those together woud go in the medium box which is $10( rounded off). So $430 for both. It's the de |
I'll take this shipped to 47201, PM me your paypal with a shipped price good sir
|
:)
I hadn't intended to part this out, but, the *perfect* house according to my wife ( we did need more space) came on the market. That being said, if it takes me a little while to respond, bear with me, and I'll ask that you hold your paypal payments until I'm actually ready to ship each part. Just check in on here to claim it, and I'll send a pm when it's ready to go. I'd like to keep it in the thread, to make sure that there is an order to everything. I'll also try again to post pictures tonight Jared, |
So much wan't and i'm sooooo close to you..........Ugh so much want and not enough $$$ :-/
|
Originally Posted by tuckntruck
(Post 1007525)
It's the denso 76 pin, assembled and decently tuned for mine, not sure what your set up is, but likely idle and timing tweaks would be it...
What's your wideband? I'm mostly going to be shipping USPS flat rate ( what fits). , those together woud go in the medium box which is $10( rounded off). So $430 for both. It's the de First dibs... |
DIYPNP + Injectors
Paypal sent a couple minutes ago for the DIYPNP + Injectors.
ID: 2EY31970ER0452730 Thanks |
Originally Posted by BTMiata
(Post 1007579)
So much wan't and i'm sooooo close to you..........Ugh so much want and not enough $$$ :-/
In similar tones though, wife found the *perfect* house... Therefore the miata goes. |
Originally Posted by tuckntruck
(Post 1007670)
Well, what are you looking at? I might need some time on a lift, it's funny, we went opposite directions, got a WRX when the family outgrew the miata :)
In similar tones though, wife found the *perfect* house... Therefore the miata goes. |
Jared,
Again, sorry but I can't even reply to your PM until I get to the magic 15 posts. Please ship it UPS on Monday. For me the postal service doesn't work reliably and if there's a signature involved it means a trip to the local PO because I travel a lot and my wife works. This usually adds 1-3 days. So, UPS it is thanks. Brian |
I'm interested in the flyin miata cf headlight duct. Can you please give me a shipping quote to 90278. Thanks, Collin
|
Willing to separate the dual throttle body setup? I really just need the pulley system as I have a second throttle body and BOV.
|
Amazing prices! Would've purchased the kit you put together for $2600 had I seen it 2 days earlier... I'll send you a PM regarding the other SC parts...
|
PM's not working for me either till I hit 15 posts... Please PM me with your e-mail or just e-mail me at x96nax@gmail.com
I'm interested in; *the Moss sc kit, *Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV. *Flyin miata resonated race pipe *Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps *Track dog racing 62.5 mm s/c nose pulley *Schroth profile ii ASM with 6pt anti sub, press to release street legal cam Would you happen to have the CARB EO sticker for the Moss kit? How much for these shipped to 94109? |
Why did you ask me to post in your other thread after I PM'ed you if you were just going to start another thread?
|
All times are GMT -4. The time now is 10:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands