FS: APR GTC-200 Uni.Adj. + RainRail Bracket - $650
12-01-2014, 07:35 PM
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2011
Location: Bay Area CA
Posts: 542
Total Cats: 17
FS: APR GTC-200 Uni.Adj. + RainRail Bracket - $650
Going a different route. I bought this off a hard parker TC owner a year + ago. It has never been tracked.
APR GTC-200 CF Adjustable Universal Airfoil
INCLUDED: Simple aluminum angle brackets to bolt the stands to the rain rail at the trunk seam. I installed 5, 1/4-28 rivnuts on each side of the vertical rails, you can do that or bolt and nut.
One small nick on the top otherwise it's pristine.
As for this moment, no pictures, but you should know wtf it looks like!
If you don't, bare with me until later.
I'd like this to be picked up here in the Bay Area CA, but will ship at your expense.
$650.00
Last edited by brainzata; 12-02-2014 at 03:16 PM.
0
12-02-2014, 04:31 PM
#4
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2011
Location: Bay Area CA
Posts: 542
Total Cats: 17
I want a bumper/frame mount set up, which I cooould use this since the second set of mounting holes are roughly 30" apart and frame rails are 31" but there are better wings for that. Besides that I am honestly not needing it anytime soon and can use some of the funds for needed parts.
0
12-13-2014, 08:05 PM
#10
Junior Member
Join Date: Nov 2007
Location: Monterey Bay area
Posts: 53
Total Cats: 2
3.9 Torsen +$
0
12-14-2014, 02:56 PM
#11
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2011
Location: Bay Area CA
Posts: 542
Total Cats: 17
I have a torsen allready. Just some ideas, I need a passenger 5pt seat, 1.6 turbo mani, DP, turbo. I need a harness for my aem ems4. Momo mod 31 330/340mm. Racepak sensors.
I do not need any drive train related parts. Unless you have an aluminum drive shaft or brand new 1 piece axles.
I do not need any drive train related parts. Unless you have an aluminum drive shaft or brand new 1 piece axles.
0
12-16-2014, 05:59 PM
#13
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2011
Location: Bay Area CA
Posts: 542
Total Cats: 17
No unfortunately not. I did, but I looked in my photobucket and it appears I deleted them or something. Busy month, so I haven't found the time to mount it for a couple pics.car is 45min away).
Here is a shot of the miata specific. As you see it sits right on the edge of the trunk cradled in a base pad. Since the universal wing's stands are roughly 2.25" wider, it sits on the other side of the gap at the edge of the trunk on the quarter panel. The 90* brackets you can see in above pics bolts to the area with the vertical plane hiding under that gap(rain rail) leaving a small space in between the brackets horizontal side to the qrtr panel . No holes in the quarter panel, trunk opens, but you can't really reach in unless you add the 2.5" risers(not included). The universal comes with different base pads which you will receive with what's pictured above.
Here is a shot of the miata specific. As you see it sits right on the edge of the trunk cradled in a base pad. Since the universal wing's stands are roughly 2.25" wider, it sits on the other side of the gap at the edge of the trunk on the quarter panel. The 90* brackets you can see in above pics bolts to the area with the vertical plane hiding under that gap(rain rail) leaving a small space in between the brackets horizontal side to the qrtr panel . No holes in the quarter panel, trunk opens, but you can't really reach in unless you add the 2.5" risers(not included). The universal comes with different base pads which you will receive with what's pictured above.
0
12-29-2014, 04:25 AM
#18
I'm interested in a used 200, but why are you asking so much? Universal wings are less then your asking price brand new. PM me and let me know your best price Alex. thanks.
Here is a brand new one for less than $600 with free shipping: APR Adjustable Wings - GTC-200 Series - Moddiction
Here is a brand new one for less than $600 with free shipping: APR Adjustable Wings - GTC-200 Series - Moddiction
0
12-29-2014, 08:38 PM
#19
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2011
Location: Bay Area CA
Posts: 542
Total Cats: 17
I was not aware that these were under $700.
I will put the price @
-$600 to locals.
-$600 and you cover shipping to others
Go a head and buy from somewhere else. You won't get pre-measured/cut/drilled brackets to bolt to your rain rails.
I do need to get a picture of it mounted. I'll get on that.
I will put the price @
-$600 to locals.
-$600 and you cover shipping to others
Go a head and buy from somewhere else. You won't get pre-measured/cut/drilled brackets to bolt to your rain rails.
I do need to get a picture of it mounted. I'll get on that.
0
12-29-2014, 10:28 PM
#20
Thanks. Let me know if you change your mind on price. 5 bucks of angle aluminum doesn't add any value really to me. If I can get a brand new wing for less with no chips shipped to my door for less than your asking price it just doesn't make sense though I respect you can ask whatever you want. If you decide you want something in the $4xx bracket let me know. Thanks.
0
