oil cooler/oil filter relocation kits, group buy?
#1
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
oil cooler/oil filter relocation kits, group buy?
hey all, I don't have the numbers just yet, but this is what I have in the works...
oil filter relocation kits,
and
oil cooler kits.
as for numbers, i will need about 15 guys to get in on this... (this is because we have to order the billet pieces in bulk)
updated info 9/17/09:
a couple of things
1. all block housings will be in black billet
2. you will have your choice of color (red blue, and black)
.....please pick one color for all of the following, else it will be a logistical nightmare
.....a. billet filter housing
.....b. push lock AN fittings for the lines
^^(obviously, if the package you get does not contain all of the above, the parts that you do get will be the color of your choice... just in case that isn't clear...)
**filter housing adaptor, and block housing adaptor will now be black**
3. all reusable oil filters will be black billet
4. all oil coolers will come with steel adaptors, (since the oil cooler itself is steel, using the steel adapters is safer than using aluminum pieces, very easy to **** up an oil cooler if you using aluminum adapters)
5. oil filter housing bracket will be polished, the backing plate will not
6. all oil filter housing whether billet or cast will come with aluminum bracket, backing plate, and mounting hardware.
package components:
oil filter relocation kits:
stage 1 kit: this comes pre assembled plug and play
1. cast oil filter housing (this is the same cast units sold by everyone else)
2. steel adapters for oil filter housing
3. pre-measured blue lines with push lock an fittings rated for 300 psi
4. billet block housing piece with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters
kit stage 1+: this comes pre assembled plug and play
1. cast oil filter housing (this is the same cast units sold by everyone else)
2. steel adapters for oil filter housing
3. pre-measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters
stage 2: this comes pre assembled plug and play
1. billet oil filter housing
2. black aluminum adapters for oil filter housing
3. pre measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters
stage 3: this comes pre assembled plug and play
1. billet oil filter housing (choice of color black, blue, and red,)
2. black aluminum adapters for oil filter housing
3. pre measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. reusable aluminum oil filter (I SAW THIS AND IT IS SICK!)
6. oil filter housing bracket, backing plate, mounting hardware
7. block housing adapters
8. block housing aluminum adapters
Oil cooler packages:
stage 1 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi rated line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 1 kit +: does not come pre assembled, you must request the amount of feet of black aeroquip line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 2 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi rated line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 2 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 3 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 3 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 4 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 4 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 5 kit: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. billet reusable oil filter (seriously you can have a fresh oil filter for every track event, never buy and throw away an oil filter ever again)
9. oil filter housing bracket, backing plate, mounting hardware
10. block housing aluminum adapters
stage 5 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. billet reusable oil filter (seriously you can have a fresh oil filter for every track event, never buy and throw away an oil filter ever again)
9. oil filter housing bracket, backing plate, mounting hardware
10. block housing aluminum adapters
edit updated 9/21
pictures:
reusable oil filter
reusable oil filter insides
300 psi line
aeroquip line
black aluminum adaptors for oil filter housing for block housing
red filter housing
blue filter housing
red hose fittings
blue hose fittings
black hose fittings
-james
oil filter relocation kits,
and
oil cooler kits.
as for numbers, i will need about 15 guys to get in on this... (this is because we have to order the billet pieces in bulk)
updated info 9/17/09:
a couple of things
1. all block housings will be in black billet
2. you will have your choice of color (red blue, and black)
.....please pick one color for all of the following, else it will be a logistical nightmare
.....a. billet filter housing
.....b. push lock AN fittings for the lines
^^(obviously, if the package you get does not contain all of the above, the parts that you do get will be the color of your choice... just in case that isn't clear...)
**filter housing adaptor, and block housing adaptor will now be black**
3. all reusable oil filters will be black billet
4. all oil coolers will come with steel adaptors, (since the oil cooler itself is steel, using the steel adapters is safer than using aluminum pieces, very easy to **** up an oil cooler if you using aluminum adapters)
5. oil filter housing bracket will be polished, the backing plate will not
6. all oil filter housing whether billet or cast will come with aluminum bracket, backing plate, and mounting hardware.
package components:
oil filter relocation kits:
stage 1 kit: this comes pre assembled plug and play
1. cast oil filter housing (this is the same cast units sold by everyone else)
2. steel adapters for oil filter housing
3. pre-measured blue lines with push lock an fittings rated for 300 psi
4. billet block housing piece with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters
kit stage 1+: this comes pre assembled plug and play
1. cast oil filter housing (this is the same cast units sold by everyone else)
2. steel adapters for oil filter housing
3. pre-measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters
stage 2: this comes pre assembled plug and play
1. billet oil filter housing
2. black aluminum adapters for oil filter housing
3. pre measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. oil filter housing bracket, backing plate, mounting hardware
6. block housing aluminum adapters
stage 3: this comes pre assembled plug and play
1. billet oil filter housing (choice of color black, blue, and red,)
2. black aluminum adapters for oil filter housing
3. pre measured black aeroquip lines with an fittings
4. billet block housing with 2 sensor ports 1/8npt
5. reusable aluminum oil filter (I SAW THIS AND IT IS SICK!)
6. oil filter housing bracket, backing plate, mounting hardware
7. block housing adapters
8. block housing aluminum adapters
Oil cooler packages:
stage 1 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi rated line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 1 kit +: does not come pre assembled, you must request the amount of feet of black aeroquip line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 2 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi rated line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 2 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. cast filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. steel adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 3 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 3 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 4 kit: does not come pre assembled, you must request the amount of feet of blue 300 psi line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. blue 300 psi line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 4 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. oil filter housing bracket, backing plate, mounting hardware
9. block housing aluminum adapters
stage 5 kit: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 48 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. billet reusable oil filter (seriously you can have a fresh oil filter for every track event, never buy and throw away an oil filter ever again)
9. oil filter housing bracket, backing plate, mounting hardware
10. block housing aluminum adapters
stage 5 kit +: does not come pre assembled, you must request the amount of feet of back aeroquip line:
1. billet filter housing
2. billet block housing with 2 sensor ports 1/8npt
3. aluminum adapters for oil filter housing
4. an fittings for lines
5. 72 fin oil cooler
6. steel adapters for oil cooler
7. black aeroquip line, (you must tell us the amount of line you need)
8. billet reusable oil filter (seriously you can have a fresh oil filter for every track event, never buy and throw away an oil filter ever again)
9. oil filter housing bracket, backing plate, mounting hardware
10. block housing aluminum adapters
edit updated 9/21
pictures:
reusable oil filter
reusable oil filter insides
300 psi line
aeroquip line
black aluminum adaptors for oil filter housing for block housing
red filter housing
blue filter housing
red hose fittings
blue hose fittings
black hose fittings
-james
Last edited by james399; 09-21-2009 at 09:19 PM.
#2
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
pictures of oil filter housing
ok, so check out the picts, again these will be available in black, red, and blue.
if you notice, there will be an aluminum bracket that will mount to the fire wall that will allow you to point the inlet and outlet forward, this negates the need for 90 degree an fitting, and will be a cleaner install. Also, because the fire wall is thin, we are going to include an additional backing plate,
(as we all learned in phsyics, distribution of the stress on an item over a larger surface area will allow for less stress in one particular point... in other words, i don't want all of you coming back saying that your fire wall is ripping... lol...)
as in the last group buy, all necessary hardware will be included... as for instruction on installation... i'm lazy, and will be posting a how to directly in this thread....
let me know if you guys are interested in this...
if you notice, there will be an aluminum bracket that will mount to the fire wall that will allow you to point the inlet and outlet forward, this negates the need for 90 degree an fitting, and will be a cleaner install. Also, because the fire wall is thin, we are going to include an additional backing plate,
(as we all learned in phsyics, distribution of the stress on an item over a larger surface area will allow for less stress in one particular point... in other words, i don't want all of you coming back saying that your fire wall is ripping... lol...)
as in the last group buy, all necessary hardware will be included... as for instruction on installation... i'm lazy, and will be posting a how to directly in this thread....
let me know if you guys are interested in this...
#17
Very interested... really more interested in just a cooler kit... leave the filter on the block... add adapter, and lines for a kit.
(you prob will have to go spec lengths for your cooler lines, or you will be giving away lots of extra cause i would for sure OVER ORDER to make sure my lengths are covered.)
(you prob will have to go spec lengths for your cooler lines, or you will be giving away lots of extra cause i would for sure OVER ORDER to make sure my lengths are covered.)
#18
Very interested... really more interested in just a cooler kit... leave the filter on the block... add adapter, and lines for a kit.
(you prob will have to go spec lengths for your cooler lines, or you will be giving away lots of extra cause i would for sure OVER ORDER to make sure my lengths are covered.)
(you prob will have to go spec lengths for your cooler lines, or you will be giving away lots of extra cause i would for sure OVER ORDER to make sure my lengths are covered.)
A big seller would be an adapter plate (filter stays on block) with a temp sensor fitting, and lines to an oil cooler setup.
This would keep costs down those of us that don't care about filter relocation.