FS: Maxim Works header 1994-1997 brand new in box
#1
FS: Maxim Works header 1994-1997 brand new in box
Brand new in box Maxim Works #1100ZE002 header for 1994-1997 NA Miata.
See pic showing label on box: NA8C M/T (manual transmission)
CNC Stainless Steel flange.
Light weight thin-wall Stainless Steel tubes.
The welds are works of art.
4:2:1 design with tube diameters: 42.7mm (ports): 48.6mm (collector): 50.8mm (tail).
Includes polished Stainless Steel heat shield and gaskets.
NOTES:
1) see pic comparing tail of Maxim Works and stock USDM header showing the flange on the tail has different bolt pattern and is clocked differently, so some surgery will need to be done by a muffler shop to mate it to the cat on a non-JDM car.
2) FYI, this 1100ZE002 tail is 50.8mm diameter vs. the 54.0mm diameter of the 1100ZE004 header for NB Miatas.
3) there is no EGR pipe bung on the header as on US-spec Miatas, so you'd need to delete the EGR cross-pipe and put a block-off plate on your intake manifold.
MSRP $1050 (before importer's margin and cost of shipping from Japan).
http://www.maxim-works.com/products/...zda_na8c.shtml
Price reduced to $1000 shipped in USA.
PM me with any questions.
Thanks for looking!
See pic showing label on box: NA8C M/T (manual transmission)
CNC Stainless Steel flange.
Light weight thin-wall Stainless Steel tubes.
The welds are works of art.
4:2:1 design with tube diameters: 42.7mm (ports): 48.6mm (collector): 50.8mm (tail).
Includes polished Stainless Steel heat shield and gaskets.
NOTES:
1) see pic comparing tail of Maxim Works and stock USDM header showing the flange on the tail has different bolt pattern and is clocked differently, so some surgery will need to be done by a muffler shop to mate it to the cat on a non-JDM car.
2) FYI, this 1100ZE002 tail is 50.8mm diameter vs. the 54.0mm diameter of the 1100ZE004 header for NB Miatas.
3) there is no EGR pipe bung on the header as on US-spec Miatas, so you'd need to delete the EGR cross-pipe and put a block-off plate on your intake manifold.
MSRP $1050 (before importer's margin and cost of shipping from Japan).
http://www.maxim-works.com/products/...zda_na8c.shtml
Price reduced to $1000 shipped in USA.
PM me with any questions.
Thanks for looking!
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM