looking at the FP web site and found this
#1
I'm Miserable!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: monroe CT
Posts: 463
Total Cats: 0
looking at the FP web site and found this
Was looking for a new turbo and i was on the Foced Performance web site and found this. I wanted to know if any one has used this turbo or see this turbo before looks like it might be good on a miata.
Forced Performance Turbochargers: Nissan SR20 20G Turbocharger
Forced Performance Turbochargers: Nissan SR20 20G Turbocharger
#2
From an entirely noob perspective I imagine that is a massive turbo. Just based on the fact it is "an enormous increase in flow over the Big28" and the big 28 is a big increase over their T28 kit. Maximum street performance on a 2.0-2.5 liter car too.
I'm going to say this might eat your 1.6
I'm going to say this might eat your 1.6
#4
Senior Member
iTrader: (1)
Join Date: Jun 2006
Location: Outside of the Loop-ATL
Posts: 761
Total Cats: 1
well never used that 20g but I did have an older FP 20g for my DSM.
Based on how the spool was on the 2.0, I won't want it on anything but a 1.9 or 2.0L miata. The spool is going to hurt, but it will make some nasty power
Based on how the spool was on the 2.0, I won't want it on anything but a 1.9 or 2.0L miata. The spool is going to hurt, but it will make some nasty power
#5
I'm Miserable!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: monroe CT
Posts: 463
Total Cats: 0
The hot side flows 8cm2 wich is like an evo 8 turbo but with a 20g hot side i am planning on running 20 to 25 psi i have a built motor now with 9:1 comp ported polished head and the car is a 99 so its the higher flowing heads and the motor ia a 1.9 with the over bore. im going to run a 8k redline or a 8.5k redline.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM