LukeG

I'm prepping my Exocet for time attack and having some steel on aluminum rubbing issues. When the car was built, the hood pins were mounted to steel mounts that are rubbing against the aluminum radiator. No bueno.

You can see the steel is rubbing through the aluminum. I figured I would ask the racing guys here as you all probably know of a better fix than I can think up. I was considering having a buddy put some aluminum beads on the rub spots, but that isn't a long term solution. Can you guys think of anything I can put between the two to mitigate the issue? I tried a piece of rubber hose, but getting it to stay in place was not working.

Thanks for any help!

ftjandra

iTrader: (6)

Seems like you can just cut that pointy part off the bracket?

--Ferdi

concealer404

iTrader: (3)

I'd just cut the steel corners back a little.

LukeG

I think it is adding some structural support to the hood pins. Might just need to fabricate new hood pin supports to be thicker and stiffer so they don't need to touch the radiator. I'll try trimming them down though and see what happens. Thanks!

concealer404

iTrader: (3)

That end of it isn't, it's not supported by anything.

rleete

iTrader: (21)

Yeah, concealer404 has it right. That end is cantilevered, and is not doing anything but moving. Cut it off and touch up the paint.

LukeG

Sweet, thanks guys!!!

Cory M

Yeah, cut that pointy end off, it's not doing anything for you.If it's still close after that maybe you can space your radiator a bit further away with some washers, or get some plastic edge guard from someplace like McMasterCarr and put that over the edge of the steel part.

LukeG

Chopped the pointy end off and now the support is rubbing lower down on the radiator. I'm just going to have a buddy fab up some new brackets in steel that clear the radiator completely.

Thanks for the help guys!

Blkbrd69

Hard to tell from the photos but that smaller rub looks fairly deep? What is the thickness of the chaffed area?

Take the corners off, steel will always win at the worst time.

Might be worth a preventive bead depending on depth?

brainzata

iTrader: (4)

wow