Hey I don't have my XIda 2 yet but how to rock MSM bilstein ?!?
#1
Hey I don't have my XIda 2 yet but how to rock MSM bilstein ?!?
My setup is basically 949 Big Grip Kit on a 2000 NB N/A 145 WHP and waiting for Xida second gen...
I have a track event end may on a small course, think almost auto-x where the longest straight is roughly 400m but T1 is flat out (or was).
That being said, what kind of swaybar should I rock with stock MSM bilstein and NB top hats ? Sorry I have no clue as I exclusively ran with JIC 800/500 setup.
I have FM front swaybar 5/8 in storage, 1.125" RB on the car with the reinforcement tab and block, 14mm rear MSM and I do have stock NB bars too.
Will rock 225 NT-01 on 6UL 15x9,
-3.0 deg front camber, 4 deg caster, 0 toe
-2.3 deg rear camber, 0 toe
I'm open to suggestion and your experiences !
I have a track event end may on a small course, think almost auto-x where the longest straight is roughly 400m but T1 is flat out (or was).
That being said, what kind of swaybar should I rock with stock MSM bilstein and NB top hats ? Sorry I have no clue as I exclusively ran with JIC 800/500 setup.
I have FM front swaybar 5/8 in storage, 1.125" RB on the car with the reinforcement tab and block, 14mm rear MSM and I do have stock NB bars too.
Will rock 225 NT-01 on 6UL 15x9,
-3.0 deg front camber, 4 deg caster, 0 toe
-2.3 deg rear camber, 0 toe
I'm open to suggestion and your experiences !
Last edited by joyrider; 05-09-2014 at 03:24 PM. Reason: adding track vid for reference
#4
Elite Member
iTrader: (24)
Join Date: Jun 2007
Location: Woodland Hills, CA
Posts: 4,667
Total Cats: 18
Trim your rear bump stops. I'd go with RB front bar on full soft and 14mm rear bar to match the 215/158 lb/in spring rates.
Use this - FCM_MSDS_1_8NB.xls
PS: watched the video, looks like insane amount of fun!
Use this - FCM_MSDS_1_8NB.xls
PS: watched the video, looks like insane amount of fun!
#5
Trim your rear bump stops. I'd go with RB front bar on full soft and 14mm rear bar to match the 215/158 lb/in spring rates.
Use this - FCM_MSDS_1_8NB.xls
PS: watched the video, looks like insane amount of fun!
Use this - FCM_MSDS_1_8NB.xls
PS: watched the video, looks like insane amount of fun!
The track is a ton of fun, sadly my car wasn't cooperating last time when it was turbo OTS...
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM