dogits outworks roll bar
#1
dogits outworks roll bar
Hi, i just finish my own diy roll bar in greece.
the pipe is 42,4mm˛ with 2,9mm˛ wall, how we seems?
[IMG] Uploaded with ImageShack.us[/IMG]
[IMG] Uploaded with ImageShack.us[/IMG]
[IMG] Uploaded with ImageShack.us[/IMG]
the pipe is 42,4mm˛ with 2,9mm˛ wall, how we seems?
[IMG] Uploaded with ImageShack.us[/IMG]
[IMG] Uploaded with ImageShack.us[/IMG]
[IMG] Uploaded with ImageShack.us[/IMG]
#6
thanks for all the good words.
for the last past 1-2 months i've made some roll bars for some of my friends and we had no problems so far,it takes like 1 hour to install,doesn't get in the way of the center mirror and makes the frame quite stiff.
mx's with no other frame support what so ever have seen a great deal of improvement.
in the days to come i will upload some diy's i've made and a small presentation i have done when i was designing the roll bar via solidworks and how it reacts according to the braces that it has.
thats all for now.
for the last past 1-2 months i've made some roll bars for some of my friends and we had no problems so far,it takes like 1 hour to install,doesn't get in the way of the center mirror and makes the frame quite stiff.
mx's with no other frame support what so ever have seen a great deal of improvement.
in the days to come i will upload some diy's i've made and a small presentation i have done when i was designing the roll bar via solidworks and how it reacts according to the braces that it has.
thats all for now.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM