Rx7 carrier with 1.8 lsd axel seals? - Miata Turbo Forum -Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

Suspension, Brakes, Drivetrain discuss the wondrous effects of boost and your miata...

LinkBack Thread Tools Search this Thread
Old 12-24-2014, 10:59 PM   #1
Thread Starter
Join Date: May 2013
Location: Florida
Posts: 22
Total Cats: -4
Default Rx7 carrier with 1.8 lsd axel seals?

I recently cracked my 96 Torsen lsd diff carrier arm and am planning on using an rx7 carrier. I am using my axles, diff, and Delrin bushings (if they fit) and just using the rx7 carrier. While I'm in there id like to replace the axle seals, which would I use for this, Rx7 or miata seals? Online says MA02-27-238A but that's in reguard to using the rx7 clutch lsd which I'm not using. What else would you replace if you were doing the same thing? Going to try and source a 3.9 r&p to replace my 4.10 too.
Peachesandherb is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 03:00 PM
Noob to Miataturbo from MA JxPhan Meet and Greet 3 10-02-2015 02:17 AM
Time to start learning and play with tuning The Gleas MEGAsquirt 3 10-01-2015 09:30 AM
Leaky Wilwoods mx592 Suspension, Brakes, Drivetrain 1 10-01-2015 12:45 AM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 02:44 PM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:14 PM.