NB 6 speed shifter
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Northern Michigan
Posts: 900
Total Cats: 0
NB 6 speed shifter
Sorta last minute, I decided to go 6 speed on my NA when I lost reverse in my latest 5 speed. I did not realize that I also needed the 6 speed shifter. I adapted the 5 speed one to drive around but its pretty stiff and makes my reverse lights come on with every shift, I unplugged the reverse switch. Does anyone have one I can buy or is there an aftermarket option that I am not seeing?
#6
From Bill @ MR:
OP, just bring calipers if you want peace of mind.
No OEM bushings will let you mix/match without some modification. It looks like an MR custom (as specced in their kit) tip bushing will let you run an early shifter in a late car, but not vice versa.
For NB2 6-speeds, Mazda enlarged the OD of the tip of the shaft (from 15mm to 17mm) and the ID of the hole in the turret (from 19mm to 21mm) vs. all NA/NB 5-speeds and NB1 6-speeds which share the smaller dimensions.
...
To economize on manufacturing our kits, MiataRoadster uses the same 15mm size tip on all shafts and uses proprietary thicker-walled bushings for NB2 6-speeds.
...
To economize on manufacturing our kits, MiataRoadster uses the same 15mm size tip on all shafts and uses proprietary thicker-walled bushings for NB2 6-speeds.
No OEM bushings will let you mix/match without some modification. It looks like an MR custom (as specced in their kit) tip bushing will let you run an early shifter in a late car, but not vice versa.
#7
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Northern Michigan
Posts: 900
Total Cats: 0
So the junk yard sent a 21mm end instead of a 99 to 01 6 speed shifter with a 19mm bushing! They thought it was the same shifter from the same car as the transmission but they got switched around on the cars. And they can't find a replacement. So anyone have one? Again.
#12
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Northern Michigan
Posts: 900
Total Cats: 0
And I am horrible at making decisions. I just really need to get this car driving again. I have an event soon and the alignment it terrible. Probably out of time for a corner weighting.
Thread
Thread Starter
Forum
Replies
Last Post