Looking for Mr Goodmap
So, finally, after months of engine rebuild induced dormancy, my car is about to come back to life again. I just got the last bits hooked up last night. But I am having some problems getting to idle for more than a couple of rough running seconds, much less run at all. With the firmware updates and what nots since I last had it running I would like to eliminate that as a possibility despite how likelyor unlikely that would be. Can someone send me a known running ECU file for the following....
1999 NB motor (no VVT) 550cc RX7 injectors Adaptronic's MAP transducer Adaptronics adapter harness I know I need to go through everything again eventually but right now I just want to see it start and idle (and rev a bit) to make sure everything is correctly installed and working. I got the spark and injectors to both respond using the triggers in the ECU window. That is pretty cool BTW. I am seeing RPM when I crank the motor, and all of the other sensor values are returning reasonable numbers. Thanks in advance |
Never mind. Looks like I have injector problems. To be continued.
|
All times are GMT -4. The time now is 08:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands