VE Tuning - cranking settings?
 

I followed the Adaptronic VE tuning video on youtube and it's working really really well...

In the video, they say to check the VE cranking fuel table. I tried that this morning, but didn't know what to put in the cranking table, the values didn't change at all when I selected it... Should I set all these to 90% as well?

Thanks,
-Todd

I was wondering that same thing too.

VE?? It clearly says on the cranking table that it's ms/10. What're they smoking?

When I select this:
http://www.pbase.com/toddvazquez/image/122850141.jpg

I get this:
http://www.pbase.com/toddvazquez/image/122850143.jpg

The values haven't changed from the injector timings.

orig:
http://www.pbase.com/toddvazquez/image/122850159.jpg

It does seem to start easier though...

wacky. I will have to try that.

for what it's worth, if you look at your 100kPa cells in your fuel table, your VE values in the cranking should *start* there and go up.

Cool... I'll try popping those 100kPa VE values in there (95% or so) and see how she does... Makes sense esp. since it started easier this morning (15c and 120% cranking VE) than it did hot when I picked up some lunch (~60% cranking VE)...

Thanks!