PhantomRoadster

Wari freezes when I tune with my acer aspire one. It won't even last two minutes and I can't get anything done. Then after it says it can't see the ecu when I try to reopen it. I specifically bought the damn thing for the ecu. When I try a laptop I have no issues. I just bought more ram online to see if it helps.

Are you guys seeing the same thing with your netbook?

PhantomRoadster

I guess your netbooks are all good. I wonder if it has to do with the way I had to install the db9 to usb software.

sv650_ck

iTrader: (10)

It's only happened to me a couple of time in a year or so. Make sure your Port modbus mode is set to 100ms.

PhantomRoadster

mode was set to 100ms. I installed more ram yesterday and it still froze.

jeff_man

iTrader: (7)

if your usb to db9 is plugged in when your pc turns on, comes back from sleep, ect it will freeze, turn on your pc, open wari then plug in your usb to db9.

also try new version of wari.

triple88a

iTrader: (2)

u ****** aint got ****, this is what i use to tune. I let is sleep all it wants, when i press the power button its on and it works.

http://www.amazon.com/exec/obidos/AS...9-20/ref=nosim

Toshiba Tecra 550CDT Notebook (266-MHz Pentium MMX, 32 MB RAM, 4 GB hard drive)

timk

You must have lots of patience. I use a Toshiba Portege 2010, from memory it is a P3 866 with 512MB RAM. Even that thing ***** me to tears with how slow it is.

triple88a

iTrader: (2)

hehe i always have the program on, when i shut it down, i close the screen and it goes to sleep after 5-10 minutes, when i press the power button its back up <10 seconds later, i enter my pass and 10-15 seconds i'm ready to change tunes (program is still up and all loaded, the previous settings already loaded).

i'm running 2000pro on it)

I'm planning on tareing it up apart and making it full car tunning computer.