Ok. I hope Adaptronic comes in tomorw. I have all my lines already ran and soldered as the instructions state. I even ran the 5/16 line from the back of the manifold to a t of 1/4 i believe it was. All thats left is to connect three wires (ground, source, and power to the map from MAF and IAT) and plug and play right? But, once I get this installed under my dash and connect my computer to it, should I load the 600cc map packs from boundary engineerings web page, then do the idle setup manual that Travis had just made? Or do i not even bother with the 600 cc map pack? It would be really nice if someone had a map for a 99 with d' 600 cc injectors and a gt2860. But, i'm just trying to look for advice. BTW I'm a complete noob to all this stuff.

 

Use Travis’s 600cc map, all you need is to get it started, yes there are many adjustments to make to get your car to run smoothly, start with the idle first. Also check out the Adaptronic forum Adaptronic - Index it doesn’t mater if the tuning hints are for a BMW or a GTI it’s all good background please read it all. When you are finished you will sound like an expert (we wont tell anyone any different ).
Good luck mate.
Ted

 

thanks for the advice Ted! ill give that a shot and see how it idles. Ill be posting my progress as soon as i get the adaptronic.