AEM
Sponsored by:
Sponsored by:

EMS-4 self adjustment?

 
Old 08-25-2013, 06:49 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Oct 2011
Posts: 97
Total Cats: 0
Default EMS-4 self adjustment?

I recently installed COPs in wasted mode and all ran fine. I then decided to go ahead and wire sequential (2 days later) and just used wire nuts on the connections to make sure I didn't screw anything up. It ran perfectly and I ran it for a couple days with just the wire nuts. So here is where the issue developed. I got to work and realized that my idle was about 2000 (about 1100 normal). So this weekend I soldered all the wiring connections and when I started it up it ran a good bit leaner than usual, at least at idle (17-18) and idle was at 1600. I took it for a quick hard drive to see if there were any other issues and found none. About half way through the drive the idle seemed to be back to normal. Is it possible that the ECU had to relearn the idle after being modified, or do I need to start checking sensors aand connections. By the way at first I suspected a vac leak and did a quick leak test and did not see any issues.
gthill13 is offline  
Old 08-27-2013, 03:42 PM
  #2  
Junior Member
 
Join Date: May 2011
Posts: 51
Total Cats: 2
Default

Did you look at your idle learned values, your target idle speeds, throttle position values,..? Those would have gave you a really good indication of what happened. If your idle target was high that would account for it, If your car was idling high and you were out of idle learned value, if your tps was reading high causing the tps offset to count higher idle targets and then the high idle. There are a ton of reasons why it would do what it did. not looking at the values of having logs of those values it is hard to say why it happened.

The idle does not "learn". Once you set your Idle % v. Target table, the only thing the ECU does is count Idle trims(Idle Learned values). Depending on your settings this should only take a few seconds.

EB Turbo
EB Turbo is offline  
Old 08-30-2013, 09:29 PM
  #3  
Junior Member
Thread Starter
 
Join Date: Oct 2011
Posts: 97
Total Cats: 0
Default

I did not get a chance to log anything during this. I am going to the track this weekend and plan to do a bunch of logs and get the 02 fB hooked up as well. I think I am a little rich at WOT and hope to do a little tuning during the day.
gthill13 is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
wred
MEGAsquirt
20
10-16-2015 01:26 AM
ihiryu
MEGAsquirt
33
10-08-2015 04:56 PM
slomiata
MEGAsquirt
5
10-07-2015 01:11 PM


Thread Tools
Search this Thread
Quick Reply: EMS-4 self adjustment?


Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.