Compaddict, I never understood why this setup of flairs had not been done before in CSP or DP... Well done! 15x11 and 275s?

https://cimg1.ibsrv.net/gimg/www.mia...80f08dba3.jpeg
https://cimg2.ibsrv.net/gimg/www.mia...3980d32b5.jpeg
https://cimg3.ibsrv.net/gimg/www.mia...65a8c5a0d.jpeg
https://cimg5.ibsrv.net/gimg/www.mia...774e932a3.jpeg
https://cimg4.ibsrv.net/gimg/www.mia...09a3758d9.jpeg
Made a few changes: Still 1/2" marine birch, coated w thin epoxy then outdoor furniture paint. Extended to 3 15/16" reduced routed thickness at rear mount and shimmed down 1/4" at front mount to lower nose, added 3" NACA brake ducts to try out, end plates just inspire discussion and to torment CFD aero guys.

Nice :)

I'm more curious about the clear film you have over the bumper mouth

Love Bugs.:vash:

Between Trackspeed radiator, cut frame and ducting w hood vents that is plenty of opening on street.

Big hole where fog light used to be is inlet for big oil cooler I keep covered except on track. cover lip openings as not used.

Yessir! Sorry about the delay.
Vince

Hi! Here's my first contribution to this post (please excuse my English if there is faults, I'm French 😅)

Dollars spent: around $400 for all listed below.
Hours spent: 15
How effective: will see next weekend's trackday
Materials used: 6mm aluminum for the legs, 2mm for the endplates.
Bracket location: rain guards of the trunk
Tracks tested on: not yet
Race/TT class built for: Trackdays

​​​​​​Dual Elements 66" carbon spoiler on custom aluminum legs end endplates, gurney flap will be add in a few days.
​​Front airdam and splitter is under construction (full DIY).
Also home made vented/widened front wings that sit on homemade skirt extensions (yes, 80% of the mods are homemade lol)


https://cimg9.ibsrv.net/gimg/www.mia...5f2cdbdceb.jpg
https://cimg4.ibsrv.net/gimg/www.mia...340ba82ae5.jpg

https://cimg5.ibsrv.net/gimg/www.mia...160f336a13.jpg
https://cimg4.ibsrv.net/gimg/www.mia...7b5c9c4624.jpg
https://cimg8.ibsrv.net/gimg/www.mia...725c04c11a.jpg

Hi Guys,

Been a while thats for sure,
This Aero thread is no doubt one of the best from any platform of cars so im back.. bit of a strange one / pretty frustrating.
Drag racing..... Now when i say no prep i mean Nothing, no rubber no sticky no nothing,

Im RX7 now though not MX5 anymore but similar shape.

I been to the strip and really struggled with traction, spun right the way up to 1000ft.
soo some aero. Im considering one of them agressive duck tail spoilers.. Top speed dosnt matter, that can come later on in time.

whats peoples thoughts on this..

Currently i dont really have any aero. Heres some vids of the car:


https://cimg6.ibsrv.net/gimg/www.mia...4d3d3dbfba.jpg
https://cimg7.ibsrv.net/gimg/www.mia...391f3b71c.jpeg