Just another turbo miata
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Louisville, KY
Posts: 194
Total Cats: 0
Just another turbo miata
hmm here is what it looked like the day I got it. I purchased it from a auto auction in Indiana last july.
I dissed the silly wheels and crappy tires for 15x8 6UL with hancook rs2's 225/45/15. Its not been real pretty outside since I put them on so I can get a great picture of them.
put some speakers in the headrest, now i can hear music top down on the highway much clearer then before. They are some 3.5" polks. Both seats got 2 speakers put into them for left and right.
So who is ever satisfied with 105bhp? not me... So the deconstruction reconstruction begins.
putting gauges in to monitor new things the car didn't have from the factory.
completed.
At this point the car was already running on a haltech sprint 500 ecu that was installed by lms-efi (also known as ludwig motorsports). Chris has been a friend of mine for 9+ years now.
The front mount shows up and the kitties are real interested in whats going on...
mounted.
the cx racing comes with some off brand BOV. So I replaced it with this one I picked up used.
installed! Welded in a bung for my Intake Temp Sensor.
I am using a hallman pro boost controller, it was just a short term fix. I will let the haltech controll the boost.
oil return line, chris drilled and tap the pan and made this line for me.
pic of what the car looked like after the kit was put on.
Somethings not pictured at this point, replaced oil pan gaskets, replace cams seals, new thermostat, installed rx7 injectors, FM miata stage 1 clutch with 13lb flywheel.
I dissed the silly wheels and crappy tires for 15x8 6UL with hancook rs2's 225/45/15. Its not been real pretty outside since I put them on so I can get a great picture of them.
put some speakers in the headrest, now i can hear music top down on the highway much clearer then before. They are some 3.5" polks. Both seats got 2 speakers put into them for left and right.
So who is ever satisfied with 105bhp? not me... So the deconstruction reconstruction begins.
putting gauges in to monitor new things the car didn't have from the factory.
completed.
At this point the car was already running on a haltech sprint 500 ecu that was installed by lms-efi (also known as ludwig motorsports). Chris has been a friend of mine for 9+ years now.
The front mount shows up and the kitties are real interested in whats going on...
mounted.
the cx racing comes with some off brand BOV. So I replaced it with this one I picked up used.
installed! Welded in a bung for my Intake Temp Sensor.
I am using a hallman pro boost controller, it was just a short term fix. I will let the haltech controll the boost.
oil return line, chris drilled and tap the pan and made this line for me.
pic of what the car looked like after the kit was put on.
Somethings not pictured at this point, replaced oil pan gaskets, replace cams seals, new thermostat, installed rx7 injectors, FM miata stage 1 clutch with 13lb flywheel.
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Louisville, KY
Posts: 194
Total Cats: 0
pre turbo water injection time.
Injection nozzle. Picture kinda sucks its actually underneath the pipe.
pic of the car with its new shoes on.
Ordered a 3" downpipe from Artech, Abe does beautiful work!
Here is the downpipe installed
The rest of the exhaust before it went on the car. 5x11x22 muffler keep its wife friendly.
pic of the car from saturday
Injection nozzle. Picture kinda sucks its actually underneath the pipe.
pic of the car with its new shoes on.
Ordered a 3" downpipe from Artech, Abe does beautiful work!
Here is the downpipe installed
The rest of the exhaust before it went on the car. 5x11x22 muffler keep its wife friendly.
pic of the car from saturday
#10
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Why do you say fail reverant?
I am thinking about doing it too, in addition to my direct port WI
My thoughts are that it would help spool up and also reduce AITs.
There are spare maps and outputs in the hydra I could use to drive a high speed valve.
#12
I like your build, but please upgrade the pre-turbo water injection to a proper, tried and true system with a high pressure pump injecting just before the throttle body. You've already got the nice fittings and nylon line, so you don't need much more.
Why do I care? I've been using water injection since 1997, have helped countless people build install and tune their setups, and have hosted one of the first DIY water/alcohol/methanol injection websites. I can tell you for a fact that pre-turbo injection is the least optimal configuration for real performance gains, and have personally seen this method damage compressor fins. Nothing personal, but if you're going to do it, do it right.
Why do I care? I've been using water injection since 1997, have helped countless people build install and tune their setups, and have hosted one of the first DIY water/alcohol/methanol injection websites. I can tell you for a fact that pre-turbo injection is the least optimal configuration for real performance gains, and have personally seen this method damage compressor fins. Nothing personal, but if you're going to do it, do it right.
#13
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Louisville, KY
Posts: 194
Total Cats: 0
I like your build, but please upgrade the pre-turbo water injection to a proper, tried and true system with a high pressure pump injecting just before the throttle body. You've already got the nice fittings and nylon line, so you don't need much more.
Why do I care? I've been using water injection since 1997, have helped countless people build install and tune their setups, and have hosted one of the first DIY water/alcohol/methanol injection websites. I can tell you for a fact that pre-turbo injection is the least optimal configuration for real performance gains, and have personally seen this method damage compressor fins. Nothing personal, but if you're going to do it, do it right.
Why do I care? I've been using water injection since 1997, have helped countless people build install and tune their setups, and have hosted one of the first DIY water/alcohol/methanol injection websites. I can tell you for a fact that pre-turbo injection is the least optimal configuration for real performance gains, and have personally seen this method damage compressor fins. Nothing personal, but if you're going to do it, do it right.
#14
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
I like your build, but please upgrade the pre-turbo water injection to a proper, tried and true system with a high pressure pump injecting just before the throttle body. You've already got the nice fittings and nylon line, so you don't need much more.
Why do I care? I've been using water injection since 1997, have helped countless people build install and tune their setups, and have hosted one of the first DIY water/alcohol/methanol injection websites. I can tell you for a fact that pre-turbo injection is the least optimal configuration for real performance gains, and have personally seen this method damage compressor fins. Nothing personal, but if you're going to do it, do it right.
Why do I care? I've been using water injection since 1997, have helped countless people build install and tune their setups, and have hosted one of the first DIY water/alcohol/methanol injection websites. I can tell you for a fact that pre-turbo injection is the least optimal configuration for real performance gains, and have personally seen this method damage compressor fins. Nothing personal, but if you're going to do it, do it right.
I'd like to do pre-turbo for faster spool but am concerned about potential fin damage. It looks like even if I spray directly onto the compressor when I lift off throttle I will still get pooling in the intake.
#15
From what I've read different mixtures will have different evap points. I'd look into that more.
I do know another turbo miata owner with pre turbo water injection. With only 91aki ca gas he could only get to 12~ psi on his setup before det, with water it was around 16psi and know with some alky mix its near 19psi
With 100 aki he can do 20psi without water.
I do know another turbo miata owner with pre turbo water injection. With only 91aki ca gas he could only get to 12~ psi on his setup before det, with water it was around 16psi and know with some alky mix its near 19psi
With 100 aki he can do 20psi without water.
#17
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
From what I've read different mixtures will have different evap points. I'd look into that more.
I do know another turbo miata owner with pre turbo water injection. With only 91aki ca gas he could only get to 12~ psi on his setup before det, with water it was around 16psi and know with some alky mix its near 19psi
With 100 aki he can do 20psi without water.
I do know another turbo miata owner with pre turbo water injection. With only 91aki ca gas he could only get to 12~ psi on his setup before det, with water it was around 16psi and know with some alky mix its near 19psi
With 100 aki he can do 20psi without water.
How do you plan to do yours with no water pump?