|
The adventures of my drift miata
9 Attachment(s)
I have some scattered partial build threads between this site and club roadster but no single thread really tells the whole story of my car so I'm going to attempt to put it all in one place here.
I bought this miata for $1900 from a performance/speed shop, basically what happened is, somebody burnt a couple valves, took it to this shop, the shop rebuilt the head, gave the customer the $1400 bill and he couldn't afford it so the shop bought the car from him for $500. Then I came along and bought the car with literally 0 miles on the rebuilt head (they were still setting timing when I pulled up to check the car out). The car had a salvage title and there was some obvious previous damage in the right rear quarter panel but no biggie. The top was also ripped but other than that ran great, they smogged it on the spot and I took it home. https://www.miataturbo.net/attachmen...ine=1389317794 That pic was taken after I replaced the ripped soft top with a $150 one off ebay, not as high quality as the OE but it keeps me dryish in the rain, though it does leak a little onto the passenger's lap. https://www.miataturbo.net/attachmen...ine=1389317794 First mod, megan ez-street coilovers, this was after replacing all the maintenance crap like shift boots, transmission and diff fluid, etc. (the timing belt, plugs, oil, and coolant had all been changed by the shop when they did the head) https://www.miataturbo.net/attachmen...ine=1389317794 Cuz I could, I rode this low for two days and then raised it about an inch, then a few weeks later raised it another 3/4" http://i11.photobucket.com/albums/a1...0/100_1024.jpg Ebay cone filter and a homemade heat sheild. https://www.miataturbo.net/attachmen...ine=1389317794 Upgraded to 1.8 Calipers and rotors all around. https://www.miataturbo.net/attachmen...ine=1389317794 Painted rear finish panel black, when I got the car it was silver which clashed horribly with the red, this looks much better IMO. https://www.miataturbo.net/attachmen...ine=1389317794 https://www.miataturbo.net/attachmen...ine=1389317794 A little weight reduction, removed the carpet and some other interior pieces. Also added a shift knob to replace the crappy JB-welded on carbon fiber one that came on the car. Also added a digital media receiver, somebody tried to give me shit about removing the carpet but still having a stereo, but this thing doesn't play cd's only USB and AUX inputs so it weighs less than half what a headunit normally does. https://www.miataturbo.net/attachmen...ine=1389317794 Flyin miata frame rail braces, best mod for the buck ever! https://www.miataturbo.net/attachmen...ine=1389317794 I was having issue with overheating whenever I'd push the car hard, so I replaced the thermostat and relocated the license plate so it wouldn't block the incoming air. I also wired the fans together so they'd both come on at the same time. Problem solved. |
I'm sorry to read that you have ties with club roadster. Car looks like a good starting project. What are your plans for the engine/ rest of the car?
|
9 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1389318535
used ebay catback, took this pic while I was having an extra hanger put on it because one was broken off when I got it. https://www.miataturbo.net/attachmen...ine=1389318535 https://www.miataturbo.net/attachmen...ine=1389318535 added a hard dog roll bar https://www.miataturbo.net/attachmen...ine=1389318535 Took the back bumper off to trim the bottom https://www.miataturbo.net/attachmen...ine=1389318535 https://www.miataturbo.net/attachmen...ine=1389318535 1.8 differential with an rx7 clutch type lsd, housing painted by myself. https://www.miataturbo.net/attachmen...ine=1389318535 https://www.miataturbo.net/attachmen...ine=1389318535 https://www.miataturbo.net/attachmen...ine=1389318535 Put on some BBS mahle's shortly before my first drift event. I sucked lol |
Pics of turbo?
|
18 Attachment(s)
Originally Posted by thirdgen
(Post 1090169)
I'm sorry to read that you have ties with club roadster. Car looks like a good starting project. What are your plans for the engine/ rest of the car?
Attachment 184998 This is me looking like I'm doing something cool but really just spinning out lol Attachment 184999 Added a power steering oil cooler. It didn't help, fluid shot out the reservoir everytime I drifted the car ever. I eventually got rid of power steering altogether, but let's keep this chronological... Attachment 185000 Attachment 185001 Attachment 185002 Attachment 185003 Modified knuckles for my steering angle, powdercoated red. I also made some stainless braided brake line that were extended for the front brakes to account for the extra angle. Made them all out of stuff off summit racing for cheap! Attachment 185004 Attachment 185005 Attachment 185006 Another drift event. It had rained a little earlier in the day so the drag races were cancelled, meaning that us drifters were allowed on the race track rather than the skid pad. This unfortunately led to my first crash, but nothing really happened besides breaking the finish panel and some scratches. Long boring video from that night: |
:inout:
|
lets review:
1. pics of too low (bonus point under truck shot) 2. drifting 3. drifting crash damage 4. no turbo those are pretty egregious and going to lead down the bad road here, but honestly the rest of the car is fine. I mean it's not awful or anything. Curious how the steering knuckles hold up. Does the car bump steer at all? |
17 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1389321881
Got a new finish panel. https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 Passenger seat got the foam-ectomy https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 sitckerz because drift missile... https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 sparco wheel and turn signal intakes. https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 This is when I started assembling turbo parts. That's an ebay manifold and downpipe, the downpipe does not fit at all btw. The turbo was sold to me as a 50-trim t3, it was actually a 70 trim t3/t4, my car wouldn't even start spooling until 4200 with that guy! I also managed to blow the seals in this turbo in less than two weeks. The rest of the build specs: Begi FPR, 1.8L injectors, tial wastegate, cx racing FMIC kit and BOV. https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 https://www.miataturbo.net/attachmen...ine=1389321881 Here's how well that downpipe fit btw, notice the heater hose resting on it and how badly it hits the chassis. My favorite part though is how well it bolted to the stock exhaust... |
Originally Posted by y8s
(Post 1090188)
lets review:
1. pics of too low (bonus point under truck shot) 2. drifting 3. drifting crash damage 4. no turbo those are pretty egregious and going to lead down the bad road here, but honestly the rest of the car is fine. I mean it's not awful or anything. Curious how the steering knuckles hold up. Does the car bump steer at all? |
14 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1389322712
DIY alignment https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 Now we're getting to the stuff you guys came here to see. I love my custom heater lines here. I went to a specialty automotive hose shop, told him I needed something that could survive a high heat environment and he sold me some (very expensive) push-loc hose and fiberglass heat sheild. This hose is really tough and hard to work with but it's very durable! I don't think these heater hoses will ever melt through in this location. I routed it a little differently to avoid the downpipe as best as possible. https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 https://www.miataturbo.net/attachmen...ine=1389322712 The new exhaust. It starts 2.5" right off the turbo and then transitions to 3" as soon as there's room for it. 3 total v bands, one at the turbo and one on either side of the high flow cat. I told my exhaust guy I wanted it as straight as possible and he definitely delivered! |
14 Attachment(s)
There's a video of the first event with the turbo on and actually functioning properly. Naturally, as soon as I get this thing all back together I crash it again which you can see in the video, but more on that later. Side note, I still suck pretty good at this point but I'm at least getting better. Attachment 184991 Finished. For the time being at least. Attachment 184992 Took apart the diff to find that the clutch plates had been installed in the wrong order the last time someone had taken it apart. I measured all the discs in spec though so I ended up just putting it back together. Attachment 184993 Attachment 184994 Attachment 184995 Oh yeah, I crashed it again, but it didn't really stop me. Luckily all the damage done was in front of the suspension, though it did bend the frame a little. Attachment 184996 Here's a good shot that shows how I fixed it. I welded a thick steel pipe between the frame rails, cut away all offending damaged goods, and am using hood pins. I still want to add some more here but it was what I could come up with to make my car survive the rest of the season. It looks good enough with the body panels on it as shown below: Attachment 184997 And that's about when this video takes place: |
25 Attachment(s)
Attachment 184979
And this is where shit really breaks. I'm still not sure what happened, though I suspect a faulty wastegate actuator, but my car started boosting 15 PSI, making the car run really lean, well, the headgasket did not take long to pop under these conditions. I put in some ARP headstuds while I was in there. After re-assembling though it had a slight tick, I took it for valvetrain noise as apparently it's common for the lifters to tick a little after having the head off so I shrugged it off. That's about when this video takes place, as you can see, I'm finally starting to get the hang of this whole drifting thing. Yeah, so if you watched you notice that my tick turns louder and louder until it's pretty severe rod knock, ending with a blown hole in the side of the engine block. Yay! Attachment 184980 I found a 1.8 engine to replace it with though... http://i11.photobucket.com/albums/a1...0/100_1516.jpg Attachment 184981 motor mount brackets that I got from a member on norcal roadsters Attachment 184982 Attachment 184983 Attachment 184984 BEGI coolant re-route parts, also notice the protege valve cover I got from the junk yard, it'll be powdercoated shortle ;) Attachment 184985 Attachment 184986 Attachment 184987 Attachment 184988 Attachment 184989 Attachment 184990 And under the knife she goes. And that's where my project stands I just got the engine out today. Now you're all caught up and I can update from here. I'm hoping tomorrow to get the engine bay all pressure washed and sparkly clean and then I need to pull the rack and pinion and depower it. |
Needs more mismatching panels man. Not to nissan 240 territory yet.
|
Originally Posted by triple88a
(Post 1090211)
Needs more mismatching panels man. Not to nissan 240 territory yet.
|
A+ drift thread, car is already a total POS after only a few drift events.
LOL, seriously though I dont care. glad you did it with a salvage title car anyways. You know your hotparts won't fit on the new motor, right? |
I gotta say man, it sure seems like you put some serious time/ know how into your car. Why drift? You could have so much more. You could have what I have, a turbo NB (rhymes with pure envy). Someday I'll post a build thread, maybe, and everyone will either:
A) masturbate instantaneously. 2) bow down and say, "we're not worthy". d) ask me how I achieved such amazingness. If you want to learn more, PM me...I'm no guidance counselor, but maybe I can help you overcome your problem. |
Originally Posted by Fireindc
(Post 1090245)
A+ drift thread, car is already a total POS after only a few drift events.
LOL, seriously though I dont care. glad you did it with a salvage title car anyways. You know your hotparts won't fit on the new motor, right? I know it's a total POS, but crashing is just a part of the sport with drifting and honestly, my car doesn't look as bad as some cars that come out to the drifts. After I crashed it I strongly considered retiring it, but eventually decided to rebuild. Then after the engine blew I really did decide to get rid of it but yet again, I decided I could just slap in a new motor (along with over a thousand dollars worth of other parts...) and be back on the road. I have decided though that one more wall tap with this chassis and it's toast. Though there's more than one local guy who buys up cheap miata's to part out that I could probably get a shell from for cheap... Also, I showed pics and videos from about 4 or 5 different events but really attended closer to 15 or so. I didn't have a go pro until later on. I gotta say man, it sure seems like you put some serious time/ know how into your car. Why drift? You could have so much more. You could have what I have, a turbo NB (rhymes with pure envy). Someday I'll post a build thread, maybe, and everyone will either: A) masturbate instantaneously. 2) bow down and say, "we're not worthy". d) ask me how I achieved such amazingness. If you want to learn more, PM me...I'm no guidance counselor, but maybe I can help you overcome your problem. |
3 Attachment(s)
|
If you were really smart, you would save yourself thousands of dollars in the future if you stopped replacing broken rear finish panels.
It was an interesting mix of decent parts and shit parts. Nobody is surprised that you blew up the 1.6 with the FMU, get a damn megasquirt, you clearly have the money if you're buying Artech parts. |
the best part of this thread is the fact that i'm leaving it and never opening it up again.
|
1 Attachment(s)
|
so you blew up a stock 1.6 and now you put in a stock 1.8 and you're going to blow it up too.
A+ thread can't wait for updates |
Originally Posted by y8s
(Post 1090312)
Redemption shot ^^^
My dick got pretty hard at the sight of the FMU. |
I like where this is going.
so he took a salvaged car and is enjoying his building/learning process. props. he's drifting and not chasing that next .02" on his lap time, big deal. at least he's tracking the car. keep up the subjectively mediocre work OP. |
Yes, we should all praise him for slapping on cheap parts and systematically destroying a car.
Everybody's a winner right? |
of course we're all winners. obama says so
|
When will you draw sharpie dicks on its face?
|
dem speakers yo
|
Needs moar plasti-dip.
|
Originally Posted by thenuge26
(Post 1090319)
If you were really smart, you would save yourself thousands of dollars in the future if you stopped replacing broken rear finish panels.
It was an interesting mix of decent parts and shit parts. Nobody is surprised that you blew up the 1.6 with the FMU, get a damn megasquirt, you clearly have the money if you're buying Artech parts. so you blew up a stock 1.6 and now you put in a stock 1.8 and you're going to blow it up too. Yes, we should all praise him for slapping on cheap parts and systematically destroying a car. dem speakers yo |
|
2 Attachment(s)
Originally Posted by vitamin j
(Post 1090553)
This is what it used to be.
https://www.miataturbo.net/attachmen...ine=1389417491 In other news, my ARtech manifold came in today! I also purchased a cheap laptop to tune a megasquirt with yesterday. Oh, and sent my 460cc injectors off to witchhunter to be cleaned and flow tested. I work weekends so I probably won't get much else done until tuesday, then I'm planning on getting the new engine in and everything hooked up and ready to go by thursday. Since I'm using the 1.8 throttle body I don't know that it'll be able to start until I get a MS in there so then we'll play the waiting game... https://www.miataturbo.net/attachmen...ine=1389417491 |
Originally Posted by 6strngs
(Post 1090526)
I've seen more than one person out there turn a really nice car into a POS real quick
Were you hoping for people here to praise what you've done? This is a forum based around a car that we like. You take said car and smash it into walls repeatedly. It's akin to buying a nice painting, drawing sharpie dicks all over it, then showing up at the gallery with it expecting people to respect what you've done. |
Back in the 60's during the drug explosion, it was said that "everything starts in California and moves east."
That being stated, "I hope California breaks off the continent and falls into the ocean before this trend infects the rest of the country." I truly am glad to see you're planning on running megasquirt, and other respected goodies, but when the sun rises...I guess drifter's gonna drift. |
Originally Posted by dieselmiata
(Post 1090567)
Congratulations, you've now joined them.
Were you hoping for people here to praise what you've done? This is a forum based around a car that we like. You take said car and smash it into walls repeatedly. It's akin to buying anice painting, drawing sharpie dicks all over it, then showing up at the gallery with it expecting people to respect what you've done. |
Spec Miata is racing.
|
Don't listen to the nay-Sayers, if you're having fun and spending your own money that's all that maters.
|
1 Attachment(s)
Originally Posted by Midtenn
(Post 1090648)
Don't listen to the nay-Sayers, if you're having fun and spending your own money that's all that maters.
|
Originally Posted by Midtenn
(Post 1090648)
Don't listen to the nay-Sayers, if you're having fun and spending your own money that's all that maters.
Also, I hope you take pride in those negative props. I did what I could to help you out, but it's a losing battle around here, lol. |
I don't think I'd ever build a drift car because it's not my thing... but it's good to see you're having your fun. For what it's worth, I find it entertaining. It's just not the style here... which makes it even more entertaining.
Nonetheless, you have a turbo miata. This site is called miataturbo. There is a correlation in there somewhere. |
Originally Posted by pdexta
(Post 1091228)
Amen to that. I enjoy seeing someone stray from conformity, glad you posted and hope you continue to keep us updated. Work with what you've got, do what you enjoy, if you break it, rebuild it and make it better. When the chassis is done, there's a billion more out there waiting for you to destroy.
Also, I hope you take pride in those negative props. I did what I could to help you out, but it's a losing battle around here, lol.
Originally Posted by Meeners
I don't think I'd ever build a drift car because it's not my thing... but it's good to see you're having your fun. For what it's worth, I find it entertaining. It's just not the style here... which makes it even more entertaining.
Nonetheless, you have a turbo miata. This site is called miataturbo. There is a correlation in there somewhere. My goal with this car has literally been to do everything as DIY as possible. The only things I've paid anybody else to do on this car is make the exhaust and set the backlash on the diff after I had it all apart. And since it seems nobody on this site wants to respond to my PMs about making me a MS DIYPNP, I might just end up hardwiring in a MS2 since I don't have A/C anyway. I'm hoping to have something ordered to tune this thing by the end of the week, I'm still on the fence between a MS2 and a DIYPNP if anybody wants to try to sway me one way or the other. I'm going to try to depower the rack and swap everything I need to over from the 1.6 tonight, tomorrow will probably start with a junkyard run to grab some 1zzfe coils (a pick and pull near me has 5 00-05 corollas in the yard, so I might grab 2 or 3 sets if anybody else is looking for some...) followed by lots of cleaning and then getting the engine mounted in the bay. Wednesday's goal is to route my upper radiator hose and get everything wired and bolted together. I might slap my stock 1.8 injectors in and try to fire it up too (I'm assuming the car should start without TPS and IAC, as those are really the only 2 sensors being changed over). Thursday I'll probably run out to ATP turbo and get a garrett wastegate actuator for my turbo, then fix and troubleshoot whatever goes wrong tuesday and wednesday :giggle: |
Originally Posted by 6strngs
(Post 1090641)
Spec miata drivers wreck all the time haha, but that's the miata's "intended purpose" so it's not "ruining" the car, right? I'm pretty sure the miata's intended purpose was to be a really fun car for really cheap, which is exactly what I'm doing with it!
Originally Posted by Full_Tilt_Boogie
(Post 1090906)
|
Originally Posted by Full_Tilt_Boogie
(Post 1091325)
Now I know what to post everytime someone makes this retarded argument.
|
Good grief - I crashed my Miata into a wall and it was (A) way nicer than this guy's started out and (B) not a salvage car when it started out.
I understand burning down the dipshit FNGs but there's got to be some sort of reasonable balance. Oh wait. Haha! Sorry guys. I forgot where I was posting for a minute there. Please continue. |
Originally Posted by Scrappy Jack
(Post 1091426)
Good grief - I crashed my Miata into a wall and it was (A) way nicer than this guy's started out and (B) not a salvage car when it started out.
I understand burning down the dipshit FNGs but there's got to be some sort of reasonable balance. Oh wait. Haha! Sorry guys. I forgot where I was posting for a minute there. Please continue. no sir, this is the open season section. plus I think we've been gentile. |
No, I get that. But the kid's grammar is reasonable (at least he capitalizes his sentences *zing*) and there is ample seat time and DIY building, plus boost.
Granted, he crashed a car that a previous owner had already crashed and he blew up a 1.6L with band-AIDs but some of the guys in this thread are acting like he trashed some pristine R-package or something. |
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1390620920
I got this in the mail today :drool: I also got my rx7 injectors back from witchhunter the other day, all the injectors are looking good flowing between 455-458cc. I'm still waiting on a 45 degree intercooler coupler and a joiner so I can finish my upper radiator hose. I think I'm going to swing by ATP turbo on tuesday and pick up some new turbo to manifold studs as mine were slightly bent. After that's all done I just have to fill it with fluids and fire it up! :jerkit: |
First start of my 1.8 swapped turbo miata - YouTube
Well, it runs! It's very noisy though, I'm not sure if it's HLA noise or rod knock :ugh: I've only run the motor ~5 minutes so far since I don't have a fan switch. Also for this video I forgot to unplug the TPS, it runs and revs a lot smoother with it unplugged. Next step is to get the megasquirt and 460cc injectors in there, but I'm still really lost as to what mods need to be performed to the megasquirt before install. |
| All times are GMT -4. The time now is 05:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands