Aidan's loose oily bunghole actually runs a track lap
#5706
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
@18psi doesn't come visit anymore. I'm too ADD for him.
I'm a little stumped on a hanger for the drivers side exit exhaust. But something will come to me. I still need to make a bunch of hangers. And get new rubber and hose clamps. And then backpurge and weld the whole thing.
I'm a little stumped on a hanger for the drivers side exit exhaust. But something will come to me. I still need to make a bunch of hangers. And get new rubber and hose clamps. And then backpurge and weld the whole thing.
#5708
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
There is one right in the middle, but not out back by the bumper.
I have a bit of stainless plate. Probably going to bolt it to the tow hook holder things and then weld a bit of rod to that. Just hard to picture in my head. And hard to get all up in there.
I have a bit of stainless plate. Probably going to bolt it to the tow hook holder things and then weld a bit of rod to that. Just hard to picture in my head. And hard to get all up in there.
#5715
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Aha! Thats the trunk i've been staring at this whole time. I'll just bolt the stainless plate to that, weld some rod on and make a hanger for the muffler.
Bam.
Bam.
#5720
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Alright, Bens cat is too big. I need something a lot shorter. Suggestions on a short 3" cat?
Doesn't have to be high performance or anything, its just for emissions.
Doesn't have to be high performance or anything, its just for emissions.