As if I won't bug you about it every time I see you
|
|
Anybody got a lead on ACLs?
5M8353H-STD |
Apparently they are unobtanium. Got a set on backorder.
Anyone need some HX bearings? |
Reusing rod bolts, yay or neigh?
|
Nay, proper installation involves measuring bolt stretch in many cases. Not worth saving $80 or whatever they are.
|
But bolt stretch != bolt yield
|
From Ian
Technically, in order to reuse rodbolts you need to have the measurements from before they were torqued, so that you can re-measure them and determine if they've stretched beyond their elastic limit. I think machine shops will usually give you the measurements when they assemble a motor for you (dunno, I've done it myself the two times I've build bottom ends), so you might ask the PO if he's got a set of measurements. If not, then you're taking a risk by reusing them. I think rodbolt failures are usually due to tensile loading rather than compressive loading, and detonation is more about compression, so that would argue that as long as they were torqued properly (ideally with a rodboltstretch gauge, not a torque wrench) they should be fine. I swear i wrote down the numbers... |
Maybe it's on your GIT
|
Originally Posted by aidandj
(Post 1620810)
I used his rod bolt stretch gauge last time (Can i borrow that@codrus ?)
I'll have to see if I can find the stretch gauge -- it should be in my toolbox, but I loaned it to someone else a year or so ago and I don't remember if I ever got it back. I'm currently at Thunderhill, email/IM/whatever me next week to remind me to check when I get home? --Ian |
Originally Posted by EO2K
(Post 1620815)
Maybe it's on your GIT
|
I wouldn’t personally run the race bearings. I run OE rods and Mahle mains. proven over many years by John Mann, and by my own oil analysis. that being said, I may have a set of STD ACL race bearings from John Mann’s spares, now owned by Martin, I can check when I get home.
|
Oh sorry, saw your FS thread. You made it sound like you needed some
|
I think he needs the standards, but he had a set of HX on the shelf
|
Yeah, what he said.
Let me know if you have the STD main bearings around. |
Yes, I have a set of 5M8353H-STD. Let me chat with Martin, see how much he wants for them.
|
Originally Posted by curly
(Post 1620876)
Yes, I have a set of 5M8353H-STD. Let me chat with Martin, see how much he wants for them.
|
wait
Ok. My man needs the truths.
First: Minivan Suck it. One million man hours, not kiddning, focussed entirely upon you. OMG who posted / posited this truth? |
Originally Posted by Mobius
(Post 1621016)
Ok. My man needs the truths.
First: Minivan Suck it. One million man hours, not kiddning, focussed entirely upon you. OMG who posted / posited this truth? |
Originally Posted by curly
(Post 1620876)
Yes, I have a set of 5M8353H-STD. Let me chat with Martin, see how much he wants for them.
|
All times are GMT -4. The time now is 06:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands