Aidan's loose oily bunghole actually runs a track lap
#5352
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
But mods can copy whole posts, and maybe even batch copy, Idk.
Not enough cares.
#5355
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Ok so I might have figured out my dying issue, but not sure exactly what setting to change.
Whats happening is holding constant throttle, low load it enters into closed loop idle, and tries to drag my idle down. Then when I push in the clutch my rpms drop like a rock (because my idle valve is barely open).
I'm guessing the culprit is PID disable rpmdot, or RPMdot Threshold. What say you guys. (Paging @deezums and @18psi)
Whats happening is holding constant throttle, low load it enters into closed loop idle, and tries to drag my idle down. Then when I push in the clutch my rpms drop like a rock (because my idle valve is barely open).
I'm guessing the culprit is PID disable rpmdot, or RPMdot Threshold. What say you guys. (Paging @deezums and @18psi)
#5358
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Yep, I've read that thread. I'll try it, but if you see in the log it will sit in closed loop idle for a long time with my foot just barely on the gas.
#5359
I already posted in your other thread, but can you set PID disable rpmdot lower? When the RPMs drop smoothly like that the rpm drop might not hit 200rpm/sec change so it won't turn CL off.
I can't go lower than 200 on mine according to tunerstudio, which is ******* stupid. If my RPM changes more than 50RPM in a second, I want CL off...
I can't go lower than 200 on mine according to tunerstudio, which is ******* stupid. If my RPM changes more than 50RPM in a second, I want CL off...