Aidan's loose oily bunghole actually runs a track lap
#9322
I had this problem. I just used a knife and shaved a bit of it off so they would fit, and now it's fine. Been running them for probably 4 years or so now? Actually long enough I should probably change them....
On my coils, I need 3ms dwell to fire a 30thou gap at 38 PSI clean. To fire a 40thou gap at 38 I need 6ms dwell.
On my coils, I need 3ms dwell to fire a 30thou gap at 38 PSI clean. To fire a 40thou gap at 38 I need 6ms dwell.
Not D585 though, right? If so, thought 5ms was max before autoignition
#9323
No, I run IGN1A coils. Similar power output from what I've read vs GM coils. I know some GM coils will auto discharge, these don't so I run more dwell for all the spark. Just adding info so if he's trying to run .045 gap with 3 or 4ms, that might not work with boost. I need 6 to run 40 clean with high boost.
#9326
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
10psi
So I was able to slam the wires in and get them to click. And it helped a lot. Like a misfire every minute or so to maybe 2 or 3 every 10. But its still there. Plugs are all gapped to .035". I wonder if its still a plug wire issue or something else.
I hate **** like this. I'm probably going to take a bit of time off from the car to work on the tune and relax a bit. Been going on this hard for too long, and a stupid problem like this pisses me off.
#9329
LOL. When I first turbo'd my car way back, the very first drive I hooked the wastegate hoses up backwards on the external gate so the more boost I made, the tighter it held the gate shut. hit 20 psi before I hit boost cut. I thought that was 8 PSI (wastegate spring pressure) and also poo'd my pants, and couldn't believe how fast 8lbs was! Looking forward to more videos!
#9332
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
It's an issue with the terminal being too far up the wires. So it has to get pushed in so far that it like squishes the boot.
Josh do you have an vvt to ls coil wires I could test out?
Josh do you have an vvt to ls coil wires I could test out?
#9338
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
When the wires were made the terminal was too far up the boot. So the sealing part of the boot needs to be squished into the valve cover. Which I got it to. Still misfires and I'm about 80% sure the coil wires are fine.