Fowler's turbo build
34 Attachment(s)
It has been nearly 6 months since I have been accumulating parts to start my build. Last year I had sold off my NB to pursue some racing dreams but that didn't end up to well. After dreading selling my car I wanted another toy to build so I decided to go with a Foxbody Mustang. After realizing how dumb I was I turned around and sold it and began my search for another miata. Well in March I had picked up a cheap 93 with a 96 swap and hardtop.
https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 Only pic I had of my NB before the upgrades and selling :facepalm: https://www.miataturbo.net/attachmen...ine=1344914864 I got a great deal on the car so I decided to roll with it and eventually do a turbo build. The interior was not to shabby, the clean MazdaSpeed Miata seats made the ride much more relaxing. Not knowing the current miles on the 1.8 I decided to "freshen up" my engine and did a complete rebuild with forged rods. Took me about 9 hours to disassemble, clean and rebuild the engine in my garage. https://www.miataturbo.net/attachmen...ine=1344914864https://www.miataturbo.net/attachmen...ine=1344914864 I decided to get myself a new steering wheel. I went with a NRG wheel with a Works Bell quick release. I love the new feel and sturdiness of the steering! https://www.miataturbo.net/attachmen...ine=1344914864 After this point I put together a list on what I wanted for my turbo build. I got some advice from Hustler and decided to go his route, talk to Abe with ARTech and Dimitris for my MS2. I started talking with Abe from ARTech and had him suggest a full build for me. We decided to do his manifold, downpipe, 3" exhaust along with his turbo lines. He suggested I start with a T25 and work my way up to a T28 later down the line. Must I say his setup turned out magnificent! https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 Then I got with Reverant and had a enhanced MS2 built for the brain. This baby showed up a few weeks ago! https://www.miataturbo.net/attachmen...ine=1344914864 After gathering these parts I decided it was time to do my install, so I went to a buddies shop and we got after it! https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 https://www.miataturbo.net/attachmen...ine=1344914864 There are many things I did not take pictures of over these past 6 months. I had some BC Racing Coilovers installed that I got cheappp from a friend along with my steering wheel and a few other odd end things. I have a lot more pictures to take of my setup and hope to keep this updated as much as possible. For now, I learn to tune. Wish me luck! |
GLORIOUS beginning. Quality parts. Good stuff
|
Thanks! My car will be nowhere near as nice as most builds on here (including yours Vlad) but for the price I got this baby I can not complain.
Went ahead and spent the money to get the parts I wanted, learned the hard way when buying junk so I went all out. I can always find me a new donor to swap my parts to in the long run once I get more familiar with these cars and tuning. |
Looks like a pretty cool build. I'm a little confused about the bedroom picture (giggity) I see a mspnp and what looks a t25g maybe? Also I see transmission fluid but no info on clutch. What did you go with?
|
Sorry, I figured that would confuse some people. I had bought a shit MS1 from a member and learned my lesson not to buy used electronics. Figured I would cut my losses and have a brand new built MS2.
As for turbo it is a T25 from a SR20DET, as soon as I am more familiar I will try my luck with a SR20 T28 :) The clutch came installed on the car already, fairly new ACT but I couldn't tell you which one I have. The car is a 93 with 96 swapped 1.8 engine and torsen! Like I said, I couldn't let this deal pass. |
I'm a bit curious why you angled your ic the way you did
|
A/c got in the way to make a flush fit. With the gap I have I still run 190* temps, and that's great with no ducting and the Texas heat of 109* on most days. It looks slick with the bumper on and my new lip, i'll get some pics tonight!
|
Good job, the car is already superior to mine and anything I've done.
|
Sarcasm? Cause I wish it was as nice as the green car Hustler. This car needs some work but for the money I have into it I have no complaints. Hopefully tuning gets better, car bogs at 4k rpms but spools to 7psi in no time!
|
Originally Posted by FowlerMotorsports
(Post 915573)
Sarcasm? Cause I wish it was as nice as the green car Hustler. This car needs some work but for the money I have into it I have no complaints. Hopefully tuning gets better, car bogs at 4k rpms but spools to 7psi in no time!
|
That would be great, I definitely will need some help because I have no clue on how these cars are suppose to act. I have a few people that helped out last night and it got better but still not running right. I need to rid of these 460cc rx7 injectors and get me some real ones either now or sometime soon.
|
Awesome I will be following this build. I am going to be running the same turbo. You have done quite well so far.
|
Originally Posted by FowlerMotorsports
(Post 914961)
I can always find me a new donor to swap my parts to in the long run once I get more familiar with these cars and tuning.
|
Originally Posted by FowlerMotorsports
(Post 915595)
I need to rid of these 460cc rx7 injectors and get me some real ones either now or sometime soon.
|
hopefully I wont need to swap out my chassis anytime soon! But the real build comes after I get this turbo tuned. 9" 6uls and new paint, thinking the ford mustang sonic blue with black or bronze wheels, may go silver but not quite sure yet. So far I love this car
|
Originally Posted by hustler
(Post 915616)
Why? My cars idle just fine on 580CC RX7 injectors.
|
Originally Posted by FowlerMotorsports
(Post 915624)
I'v read they just suck with idle, need a 11.1 afr, idk im still doing my ressearch
|
Hmm I heard the evo 650s? Reverant suggested some type of injector I can't remember right now. But I will run these til I make them out, then bigger turbo, injectors, rebuilt engine, depends how horny i get
|
Probably EV14. I buy injectors that fit the first time, without spacers and shit, because my car won't burn to the ground.
|
Hustler, don't be so emo.
Excellent start OP. |
All times are GMT -4. The time now is 04:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands