Aidan's loose oily bunghole actually runs a track lap
#7761
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
#tbt (to be clear this incident was 2 years ago, not on the current suspension. I think it might have even been on a different set of rear control arms.)
#7762
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Current plan of attack is to leave the bump stop spacers in for Laguna. I'm not out there leading a supermiata race. Just dinking around.
Over winter I will pull the springs and measure where contact occurs and build a spacer/spacers accordingly.
This will require reseting ride height and maybe redoing alignment.
Over winter I will pull the springs and measure where contact occurs and build a spacer/spacers accordingly.
This will require reseting ride height and maybe redoing alignment.
#7765
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Leaving for laguna in 3 hours.
Savington was nice enough to get in contact with me about the downpipe flange and clamp. I'll be picking them up from him at MRLS.
Which means all my downpipe material has now shown up. Waiting on flanges and 321 weldels before I actually start on the manifold.
Also bringing my dad's DSLR so I will have some less shitty pictures too.
Savington was nice enough to get in contact with me about the downpipe flange and clamp. I'll be picking them up from him at MRLS.
Which means all my downpipe material has now shown up. Waiting on flanges and 321 weldels before I actually start on the manifold.
Also bringing my dad's DSLR so I will have some less shitty pictures too.
#7767
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Were only going to Southern oregon tonight. Going to camp and leave early. Going down the coast to Fremont where we will be staying Thursday night.
#7775
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
But I have a trailer.
Pretty sure my motor is on its last leg. It is now a smoke machine. And i get a solid stream of air out of the exhaust valve cover vent.
I'll beat on it one last time and make it home. Good thing building an engine.
Pretty sure my motor is on its last leg. It is now a smoke machine. And i get a solid stream of air out of the exhaust valve cover vent.
I'll beat on it one last time and make it home. Good thing building an engine.