Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Build Threads (https://www.miataturbo.net/build-threads-57/)
-   -   Mk1 1800 Turbo Eunos S-Special JDM build (https://www.miataturbo.net/build-threads-57/mk1-1800-turbo-eunos-s-special-jdm-build-89784/)

MintyTheEunos 07-15-2016 09:18 AM

Mk1 1800 Turbo Eunos S-Special JDM build
 
20 Attachment(s)
By request here is my build thread. It's not that unusual or groundbreaking but I though i'd post one up showing the progress of the car.

Grab a beer or coffee and enjoy!

I picked up a standard 1.8 a little under 2 years ago from an ex Mazda service manager. pretty much standard other than a grubby K&N pod filter but it was clean, slow and wobbly but clean and full of charm. I made the choice to buy the first one I saw (I know that's bad but hey, time to spend driving to look at cars is time I didnt have)

Here she was, crappy and slow but she was mine and I was in love.

Attachment 176545

Attachment 176546

Attachment 176547

Attachment 176548

Factory billsteins and torsen lsd were two of the s-special extras

Attachment 176549

Blowing jap box came off and was replaced with a nice stainless system and then my love for tinkering was re-ignited

Attachment 176550

Timing was way out and at 14deg she livened up

Attachment 176551

Then the arc box and a decat... still gutless... i'm going to have to spend money here...

Attachment 176552

cambelt, immobiliser and alloy refurb and the cost were clocking up... cheap runaround phah!

Attachment 176553

Attachment 176554

Attachment 176555

This relic arrived and was returned and a chinacharger purchased... I was naive and it lasted a while but I'll but the real deal from now on.

Attachment 176556

Attachment 176557

And then injectors and a few other bits before being packed off for a basic (but effective) turbo install

Attachment 176558

Attachment 176559

Attachment 176560

Attachment 176561

Attachment 176562

Attachment 176563

Attachment 176564

She felt potent enough but there was still much to do...

psyber_0ptix 07-15-2016 09:21 AM

Hi

MintyTheEunos 07-15-2016 09:34 AM

21 Attachment(s)
A bit of paintwork and a white gv lip (it was short lived and died about 12 hours after fitting it on some building site matting :(

Attachment 176565

Flyin miata level 1 was a great buy.

Attachment 176566

Much buggering about with the megasquirt ensued to get the car running properly and a wideband fitted

Attachment 176567

Attachment 176568

New wheel to get rid of the bus wheel that was oem

Attachment 176569

More buggering with the 'pnp' to get it working with my 1.8

Attachment 176570

then off for a bit of tuning at wastegate. Hub hp

Attachment 176571

Attachment 176572

New coilies to handle 'all that power' lol

Attachment 176573

Then sh*t got serious with a mac valve (this ended up not working too well

Attachment 176574

Roll bar going in

Attachment 176575

Attachment 176576

Then some upgrades to the Ice followed by driving in the ice :/

Attachment 176577

Attachment 176578

Framerails made a superb improvement to handing

Attachment 176579

Attachment 176580

Several changes of wheels... too many to detail really

Attachment 176581

And some more driving

Attachment 176583

And a bit more paint

Attachment 176585

Attachment 176588

Kids and auto electrics... a match made in heaven!

Attachment 176590

MintyTheEunos 07-15-2016 09:34 AM

10 Attachment(s)
And then the China charger bit it when my filter fell off. Oh well. A quick call to a contact got me a minty TD04L13T and i was soon bolting it all back together

Attachment 176628

Attachment 176629

Attachment 176630

Attachment 176631

Just in time for the show the next day. (up to 3am from memory)

Attachment 176632

New fittings on the turbo and a quick refresh and we were rocking again!

http://i1189.photobucket.com/albums/...psne5bar1c.mp4

3" custom system went on with decat from the dp back. Very loud, very powerful!

Attachment 176633

Attachment 176634

A bit of dressing and back to the dyno with a crude ass bleed valve (copper pipe with holes :/ )

Attachment 176635

Attachment 176636

More messing with (awful) wheels

Attachment 176637

MintyTheEunos 07-15-2016 09:34 AM

46 Attachment(s)
Now the exterior and interior needed attention...

A funky fibreglass ducktail bootlid

Attachment 176655

Attachment 176657

Attachment 176659

And a gv lip to balance things out

Attachment 176661

Attachment 176663

Lotus elise 111S seats bought and in

Attachment 176665

Attachment 176667

Foglight relocated to o/s reversing light for uk MOT

Attachment 176669

Rad was boiling over the odd time so out with the oem

Attachment 176670

Attachment 176672

And twin fans in series to cool things down

Attachment 176674

And strip back and underseal over winter

Attachment 176675

Attachment 176677

Quick was and then first proper run of 2016

Attachment 176679

Attachment 176680

Stripped a load of crap out of the engine bay including a nice straight drop clutch line

Attachment 176682

Attachment 176684

Did some funky ducting (dont ask me if it works)

Attachment 176686

Attachment 176688

Attachment 176689

Attachment 176691

Another show, not much love for my car despite the effort so i thought i'd put some effort into the outside

Attachment 176693

Attachment 176695

So bits started to arrive

Attachment 176696

Jass stealth TSIs

Attachment 176699

Carbon fibre door mirrors (they work fine despite what people say)

Attachment 176700

Attachment 176702

And a few other subtle dress parts

Attachment 176704

5mm slip on spacers and we're getting there

Attachment 176706

Attachment 176708

Attachment 176710

Attachment 176712

Attachment 176714

Interior carbon fibre parts

Attachment 176717

Attachment 176718

Attachment 176719

De cluttered the front and added some nice powder coated towing eyes to fr and rear

Attachment 176720

Attachment 176721

Uprated upper and lower shifter gators

Attachment 176722

More driving in the hills!

Attachment 176723

Attachment 176724

Attachment 176725

And a little bit more dress up in the form of stripes and lows

Attachment 176726

Attachment 176727

Attachment 176728

And power wise this is where we are up to as of last week. My latest project coming up in the next post

Attachment 176729

MintyTheEunos 07-15-2016 10:36 AM

11 Attachment(s)
So my latest project is a powdercoated and ported inlet manifold and skunk2 throttle body plus thermal spacers. I've installed it over the last few days in little stints and she is looking and driving well.

The previous dyno from the day before I started fitting is here and nothing has been touched since. I'll have it re dynoed next week (15 psi and td04l)

Attachment 176730

Here's some pics from the process

Attachment 176731

Attachment 176732

Attachment 176733

Attachment 176734

Attachment 176735

Attachment 176736

Attachment 176737

Attachment 176738

Attachment 176739



Attachment 176740

MintyTheEunos 07-15-2016 10:50 AM

16 Attachment(s)
Here's just a few randoms that i didnt put in to the thread..

Attachment 176741

Attachment 176742

Attachment 176743

Attachment 176744

Attachment 176745

Attachment 176746

Attachment 176747

Attachment 176748

Attachment 176749

Attachment 176750

Attachment 176751

Attachment 176752

Attachment 176753

Attachment 176754

Attachment 176755

Attachment 176756

MintyTheEunos 07-15-2016 10:50 AM

Double post!

(Well done if you got to the end)

MintyTheEunos 07-18-2016 06:36 AM

220 odd view and 1 comment. No love man no love waaaaa :dunno: :sad2:

fastivab6tg25mr 08-23-2023 10:50 AM

No idea how I replied to the wrong thread


All times are GMT -4. The time now is 10:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands