My 2001 Italian Stallion money pit build
Reply
0
0
There is something wrong with the on board map sensor. I have an external map to use, but vlad is scared of wiring 
If the on board sensor worked properly, I could at least key off, then back on at higher altitudes, and I could live with that compromise.
I don't know the details, but if he turns on some active map setting in tunerstudio, I get an ultra rich condition for like 10 minutes after startup.
Vlad will chime in, I'm sure.
If the on board sensor worked properly, I could at least key off, then back on at higher altitudes, and I could live with that compromise.
I don't know the details, but if he turns on some active map setting in tunerstudio, I get an ultra rich condition for like 10 minutes after startup.
Vlad will chime in, I'm sure.
Reply
0
0
went to the track, had a blast! mainly because of the company 
they really suck at staging cars here... one run per HOUR... I could get 3-5 runs per hour back at milan dragway in michigan... and just as busy.
We didn't set up launch control for these passes, but we were fooling around on the street, seemed to make a difference. I could just focus on slipping the clutch just enough.
Also.... FFS!!!
they really suck at staging cars here... one run per HOUR... I could get 3-5 runs per hour back at milan dragway in michigan... and just as busy.
We didn't set up launch control for these passes, but we were fooling around on the street, seemed to make a difference. I could just focus on slipping the clutch just enough.
Also.... FFS!!!
Reply
1
1
Joined: Oct 2011
Posts: 5,718
Total Cats: 830
From: Detroit (the part with no rules or laws)
Milan knows what they're doing.
TnT on Wednesdays i can get in just before 4pm when the doors open and hot lap it without ever shutting the car off. Get 5 or 6 runs in in 25 minutes and head home.
TnT on Wednesdays i can get in just before 4pm when the doors open and hot lap it without ever shutting the car off. Get 5 or 6 runs in in 25 minutes and head home.
Reply
0
0
went to the track, had a blast! mainly because of the company
they really suck at staging cars here... one run per HOUR... I could get 3-5 runs per hour back at milan dragway in michigan... and just as busy.
[IMG]https://www.miataturbo.net/attachment.php?attachmentid=163697&dateline=145667 9417[IMG]
We didn't set up launch control for these passes, but we were fooling around on the street, seemed to make a difference. I could just focus on slipping the clutch just enough.
Also.... FFS!!!
they really suck at staging cars here... one run per HOUR... I could get 3-5 runs per hour back at milan dragway in michigan... and just as busy.
[IMG]https://www.miataturbo.net/attachment.php?attachmentid=163697&dateline=145667 9417[IMG]
We didn't set up launch control for these passes, but we were fooling around on the street, seemed to make a difference. I could just focus on slipping the clutch just enough.
Also.... FFS!!!
Reply
0
0
Reply
0
0
So I connected ground and power to the oem BOOST sensor, and extended a wire through the firewall from the remaining wire (not sure what to call it.. sensor readout? idk)
Now, where/how do I connect this wire to the megasquirt?
Do i push it into any of the external ports?
Do i need to change anything internally in the megasquirt?
Please be as specific and thorough as possible.
Thanks
Now, where/how do I connect this wire to the megasquirt?
Do i push it into any of the external ports?
Do i need to change anything internally in the megasquirt?
Please be as specific and thorough as possible.
Thanks
Reply
0
0
Full weight, without hardtop. zero weight reduction. Literally full glove box, cd's in center console, pyrometer, small air pump, and tire pressure gauge, spare tire, etc in the trunk
Same as before, but with a driver mod... I weighed 190 pounds that day!
In progress pic of the modified HF trailer Vladislav's dad is making for me
Same as before, but with a driver mod... I weighed 190 pounds that day!
In progress pic of the modified HF trailer Vladislav's dad is making for me
Reply
1
1
that's his 2400lb NB2 with two of us in it. we weigh 190 each.
it's actually off though, because VD uses 2350 for the weight. his car is heavier
so in reality dyno should read higher. but who cares. this was comparing the pre vs post flattop porting.
his car makes healthy power.
we raced, lol, multiple times against my same year same weight NB2. he pulls away in every gear
it's actually off though, because VD uses 2350 for the weight. his car is heavier
so in reality dyno should read higher. but who cares. this was comparing the pre vs post flattop porting.
his car makes healthy power.
we raced, lol, multiple times against my same year same weight NB2. he pulls away in every gear
Reply
0
0
^haha, yeah, we are stocky mugs.
I think we tuned a bit more after the port matching and got like 131 hp in three different pulls...
Either way, not bad for stock intake and exhaust.
Shooting for high 200's whp with ID1000s and IC'd Rotrex... but you know, the kit is still years away.
I think we tuned a bit more after the port matching and got like 131 hp in three different pulls...
Either way, not bad for stock intake and exhaust.
Shooting for high 200's whp with ID1000s and IC'd Rotrex... but you know, the kit is still years away.
Reply
1
1
