My crazy turbo build
06-23-2010, 12:53 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2009
Location: MONROE CT
Posts: 1,102
Total Cats: 3
My crazy turbo build
Well most of you know after I made 349whp on my 16g that I went out and bought a HTA3076r and had a manifold make to fit. So I thought I would make a build thread today to show what I had to do to fit it in and what not. Ill be posting pics as I go along all day.
MORE PICS SOON TO COME
MORE PICS SOON TO COME
Reply
0
0
06-24-2010, 10:28 AM
#6
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
Dope.
Have you got the car tuned and running on this setup yet (since its done now)?
PS, i want to see you use the added efficiency of the HTA compressor wheel (aka high PSI). since your engine is built if the temps dont go too high i can see you running 30-35psi all day. (the turbos are efficient to ~64.8psi or 4.5:1 pressure ratio at the turbo)
Have you got the car tuned and running on this setup yet (since its done now)?
PS, i want to see you use the added efficiency of the HTA compressor wheel (aka high PSI). since your engine is built if the temps dont go too high i can see you running 30-35psi all day. (the turbos are efficient to ~64.8psi or 4.5:1 pressure ratio at the turbo)
Last edited by shlammed; 06-24-2010 at 10:48 AM.
Reply
0
0
06-24-2010, 12:15 PM
#7
Senior Member
Thread Starter
Join Date: Aug 2009
Location: MONROE CT
Posts: 1,102
Total Cats: 3
Shlammed Im going to boost it until it stops making power, so if that means 40psi then 40psi it is i do have the 4bar map daddy and everything to support 40psi so i dont see why not. Ill have the photos up later when i get home i have over 300.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
