Here is a small update, got my new intake manifold today so i went ahead and bolted it up and also made hard lines for the turbo oil feed and coolant lines.

Here are some shitty pics i took.
http://a6.sphotos.ak.fbcdn.net/hphot..._8361165_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphot..._1907951_n.jpg

nice lookin IM

Why thank you!!!

Never. Use. That. Camera. Again.

LOL sorry my good sony got stolen when i was in GA so im stuck using a Nintendo dsi.

So does your hood shut now? What are your power goals?

Hood shuts thanks to 1.5" spacers i made. Power goals for the stock motor on the GT35r are 400whp then once i build the motor im hoping for 500-600whp. 500-550whp if i dont sleeve the motor and 550-600whp if i do sleeve the motor.

So i dont know what to do!!!! Buy this http://www.amazon.com/dp/B001OHRN94/...SIN=B001OHRN94

OR

finish my car=[

Finish your car.

+1 finish y0 shit the 2nd time around. its bad enough you never really finished your rotary swap. Don't be an urbansoot

You're trying to work yourself towards the 10k. I can feel it.

SHHHH Erin yes i am but im going to finish it. I just need exhaust and MS2 and ill be done but i might be buying an MS3X.

Well time for a well over do update. So yesterday i scored a deal, i found a guy wanting to trade his bolt in corbeau fixed back seats for stock ones. They are a bit ripped up but they can be fixed.

http://a2.sphotos.ak.fbcdn.net/hphot..._3625371_n.jpg

Also ordered my MS2 today so i can start to build that then gong to order the rest soon i hope. Also looking to down size the gt35r to a gt30r and make a fun 400whp and leave it at that. Then im going to start the head work ad get her to rev to 9k.

Ordered all my exhaust piping and other parts i need for my mega squirts ecu. So im hoping to have done with i 2 weeks from today.

We're over 5k so far... c'mon Mike, get to 10k, I know you can do it. :D

So i got my MS2 2 nights ago and got it finished last night. Now im getting all the wiring done and also trying to find a gt35r 4 bolt outlet flange locally. Im going to try and get some pics up soon. I got my floors bed lined and the new seats are in. So im hoping for a week or so to be done.

The car is done and running videos will soon fallow.

so i some how broke the aluminum part of my diff and that balancer part on the diff came loose. I was only on 5psi when this happen!!!!!!

It broke just like this one did.
http://www.boostedmiata.com/new_miat...n/CIMG1340.JPG

uh

Here are the photos i said i would post once i got them.

http://a3.sphotos.ak.fbcdn.net/hphot..._5335857_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphot..._4749600_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphot..._6590117_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphot..._4438801_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphot..._7356145_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphot..._5680521_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphot..._4396862_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphot..._5380398_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphot..._7071327_n.jpg

So this is sold?

Nope not sold yet =/ i need a family car.

Pictures of mounts
 

Hey mike I know this is an old thread, but I was wondering if you still have photos available. I can't seem to open them on the thread. I'm a noob here so if I sound incompetent, I probably am. I will be undertaking an SR20DET swap in the near future. The pictures would help a lot.

Thanks!

Mike swears up and down that he wished he would have just stayed with the BP.

Take it from him and everyone here, do not waste your time/money on swapping anything other than a v8.

Hmmm.. Well damn. I am on a budget and I only have until spring when drift season starts. I bought my 1990 with a 1.6 that has low compression on the fourth cylinder. I am going to swap either way. The 1.8 is about $1k, but I'd want to turbo that. It's tough considering the hydra II turbo set up is about that $5500 range. I don't know anymore haha. Oh well.

Thanks!

Dude. Stop. Take a breath. Read.

You're probably right.

Find a nice junkyard 1.8 swap and turbo that. Go with a MSPNP or something on the forum which can be found for $400 used. Find a log manifold for $200, a downpipe for $150, and a sr20 turbo for $200.

It can be done on a budget. Keep reading and looking around, you are at the right site, but not looking in the right places.

Yep, definately do a budget turbo setup. You can find good (used) parts here and if your good all over the internet.

Keep on trying, you dont need the most baller parts that we all gawk over to get the goals you want.

Thank you. Ya I have been lookin to a lot of things. Ill see if I can get all the parts I need on here. I'm want around 250 whp if possible. Anyway yes I will keep tryin thanks guys.